Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
3.14 Audio Settings
Figure 3.27
Audio capture
On: Add audio signal when coding. Choose it and the audio will be better.
Off: Not add audio signal when coding.
You can choose whether open audio capture for first stream or second stream.
Audio type
It has two types: G711 and G726.You can choose any one.
Note: If you use Firefox, Google Chrome, Safari, you must choose G711.Because the ActiveX
doesn’t support G726.
Audio input
MIC: If the audio input interface of the camera has connected with microphone, here you should
choose MIC.
Line in: If the audio input interface of the camera has connected with linear audio input signal
device, here you should choose Line in.
Which one you choose is decided by the device that connect with audio input interface.
Click Apply, you can see a dialog box as below:
Figure 3.28
Click OK to reboot camera.
If you give up the settings you have done, click cancel to restore the status before your settings.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
40
Back to the “For Visitor” and click the icon , you can here the voice around the camera.