Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
3.15 Initialize
Reboot: Click reboot, the infection is the same as plug the power and re-plug it.
Factory default: Click it, all parameters will return to factory settings.
Backup setting data: If you don’t want to quit all parameters that you’ve set. You can click Save
and all the parameters you set will be stored as a parameters bin file.
Restore: Click browse, choose the correct bin file and then click ok to get all parameters which
you set before.
Upgrade: Click Browse, choose the correct bin file and then click OK to upgrade. Don’t shut
down the power during upgrade.
Figure 3.29
3.16 Back
This will take you back to the video window.
4 Other Settings
4.1Use Mobile to login
If the camera has been linked to Internet, set the parameters of the camera and router. Make
sure the camera can be accessed by domain name and WAN IP.
For example, the WAN IP is183.37.54.137, the domain name is ycxgwp.no-ip.info. Then open
the mobile IE, enter the following URL, you can login the camera.http://
183.37.54.137/mobile.html or
http://183.37.54.137/wap.wml or http://ycxgwp.no-ip.info/mobile.html or http://
ycxgwp.no-ip.info//wap.wml
.
If the HTTP port num isn’t 80, you should add the port num to the URL:
http://183.37.54.137：portnum/mobile.html
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
41