Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
46
5.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Disabled
Username and password
Default admin username: admin Default password: admin
Default user username: user Default password: user
Default guest username: guest Default password: guest
5.3 Specifications
ITEMS FI9820W
Image Sensor 1/4"Color CMOS Sensor
Display Resolution 1280*720 Pixels
Lens f: 3.6mm, F:2.4
Image Sensor
Mini. Illumination 0.5Lux
Image Compression H.264
Resolution
720p（1280*720），VGA（640*480），QVGA（320*240）
View H.264 dual streaming
View Angle 67 Degree
Image adjust The brightness, contrast, saturation , is adjustable
White balance Automatic, Indoor, outdoor , is adjustable
Infrared mode Automatic , manual (on/off)
Light Frequency 50Hz, 60Hz
Night visibility
Φ5mm 11 IR LEDs, Night visibility up to 8 meters
Video
Pan/Tilt Angle Horizontal:300° & Vertical: 120°
Input/Output Linear Input/Output, which can realize two-way voice the
intercom
Audio
Audio Compression G.711/G.726, Audio sampling Bit rate 128kbps ~ 2.048Mbps
Ethernet One 10/100Mbps RJ-45
Supported Protocol
TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、DDNS、UPNP
Wireless Standard WIFI(IEEE802.11b/g/n)
Network
Support IP address static IP address, dynamic IP address
Power Supply DC 5V/2.0A (EU,US,AU adapter or other types optional)
Power
Power Consumption 8Watts (Max.)
Alarm detection The motion detecting, detection threshold Settings
Alarm
Alarm inform
Support Email、FTP etc alarm inform way
SD CARD SD CARD (Support to 32G)
Hardware
Interface
Audio Input/Output One audio input jack, One audio output jack.