Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
1.3.3 Bottom View
There are up to three labels located at the bottom of the camera; this is an important feature of
original Foscam cameras. If your camera does not have labels as shown in Figure 1.3, it may be
a clone. Cloned Foscam cameras can not use original firmware and are not eligible for warranty
or technical services.
Figure 1.3
Reset button: Press and hold down the RESET BUTTON for 15 seconds, when released the IP
camera will be reset back to factory default settings.
1.4 Preparations before use
1.4.1 Software installation
1) Put the CD in to the CD drive of your computer. Browse the CD.
2) Double click IPCamSetup.exe and install the software following the instructions.
Figure 1.4
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
4