User Manual
Table Of Contents
- 1Overview
- 2AccesstheIPCamera
- 3SurveillanceSoftwareGUI
- 4AdvancedCameraSettings
- 5Playback
- 6Appendix
- 6.1FrequentlyAskedQuestions
- 6.1.1Installtheadd-onofFirefoxbrowser,Googl
- 6.1.2Uninstalltheadd-onofFirefoxbrowser,Goo
- 6.1.3Ihaveforgottentheadministratorpassword
- 6.1.4Cameracannotrecord
- 6.1.5Subnetdoesn’tmatch
- 6.1.6NoPicturesProblems
- 6.1.7Can’taccessIPcameraininternet
- 6.1.8UPnPalwaysfailed
- 6.1.9Cameracannotconnectwireless
- 6.1.10Can’tseeothercameraslistedinmulti-dev
- 6.2DefaultParameters
- 6.3Specifications
- 6.4CE&FCC
- 6.5Warranty
- 6.1FrequentlyAskedQuestions
- 7ObtainingTechnicalSupport
www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
64
Figure 4.57
There are four alarm indicators:
A Camera Sound and PC Sound
If the camera has connected with a speaker or other audio output device, if you select Camera Sound or
PC Sound, when the motion has been detected, the people around the camera will hear beep alarm
sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first. The alarm email cannot contain the alarm picture if you have not selected Take Snapshot.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view
window as a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage
path in Video->Snapshot settings panel.
If you select Send Email, at the same time the picture will be send to you as an attachment.
Capture interval: The interval time between two pictures.
D Record
If you select this checkbox, when the motion has been detected, the camera will record automatically
and store the record files to the SD Card. Make sure the camera has inserted SD card and you have
set the SD card as the Alarm record files storage path, please go to Record—> Storage location page