User Manual
Table Of Contents
- 1Overview
- 2AccesstheIPCamera
- 3SurveillanceSoftwareGUI
- 4AdvancedCameraSettings
- 5Playback
- 6Appendix
- 6.1FrequentlyAskedQuestions
- 6.1.1Installtheadd-onofFirefoxbrowser,Googl
- 6.1.2Uninstalltheadd-onofFirefoxbrowser,Goo
- 6.1.3Ihaveforgottentheadministratorpassword
- 6.1.4Cameracannotrecord
- 6.1.5Subnetdoesn’tmatch
- 6.1.6NoPicturesProblems
- 6.1.7Can’taccessIPcameraininternet
- 6.1.8UPnPalwaysfailed
- 6.1.9Cameracannotconnectwireless
- 6.1.10Can’tseeothercameraslistedinmulti-dev
- 6.2DefaultParameters
- 6.3Specifications
- 6.4CE&FCC
- 6.5Warranty
- 6.1FrequentlyAskedQuestions
- 7ObtainingTechnicalSupport
www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
68
Setting IO alarm
On the IO page, Enable the I/O alarm, select the “Send E-mail”and ”Snapshot” before you have
configured the mail and FTP.
Figure 4.63
If an IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning
sound, alarm lights in flash etc.). Click "Clear IO alarm output" , the alarm output device will stop
alarming. If IO alarm is triggered again after alarm interval, IO alarm output device will be restart.
Click this button and
select all time range.