User Manual
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Install the add-on of Firefox browser, Googl
- 6.1.2 Uninstall the add-on of Firefox browser, Goo
- 6.1.3 I have forgotten the administrator password
- 6.1.4 Camera can not record
- 6.1.5 Subnet doesn’t match
- 6.1.6 No Pictures Problems
- 6.1.7 Can’t access IP camera in internet
- 6.1.8 UPnP always failed
- 6.1.9 Camera can not connect wireless
- 6.1.10 Can’t see other cameras listed in multi-dev
- 6.2 Default Parameters
- 6.3 Specifications
- 6.4 CE & FCC
- 6.5 Warranty
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
25
4 Advanced Camera Settings
Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings.
4.1 Setup Wizard
Please go to section 3.2 to find the way to set it.
4.2 Status
Status contains four columns: Device Information, Device Status, Session Status and Log, it will show
you various information about your camera.
4.2.1 Device Information
Camera Model: The camera model NO.
Camera Name: The Device Name is a unique name that you can give to your device to help you identify
it. Click Basic Settings and go to Camera name panel where you can change your camera name. The
default device name is anonymous.
Camera ID: Display the wired MAC address of your camera.
Camera Time: The system time of the device. Click Basic Settings and go to Camera time panel and
adjust the time.
System Firmware Version: Display the System Firmware version of your camera.
App Firmware Version: Display the application firmware version of your camera.
Plug-In Version: Display the plug-in version of your camera.
4.2.2 Device Status
On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status
and so on.