User Manual
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Install the add-on of Firefox browser, Googl
- 6.1.2 Uninstall the add-on of Firefox browser, Goo
- 6.1.3 I have forgotten the administrator password
- 6.1.4 Camera can not record
- 6.1.5 Subnet doesn’t match
- 6.1.6 No Pictures Problems
- 6.1.7 Can’t access IP camera in internet
- 6.1.8 UPnP always failed
- 6.1.9 Camera can not connect wireless
- 6.1.10 Can’t see other cameras listed in multi-dev
- 6.2 Default Parameters
- 6.3 Specifications
- 6.4 CE & FCC
- 6.5 Warranty
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
55
③ Press the left mouse and drag it on the time boxes, you can select the serial area.
Step 7: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the camera will
alarm and adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere
and anytime.
4.6.2 Sound Detection
Some models support Sound alarm.
When the ambient sound over a certain decibel ,the sound alarm will be triggered.