User Manual
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Install the add-on of Firefox browser, Googl
- 6.1.2 Uninstall the add-on of Firefox browser, Goo
- 6.1.3 I have forgotten the administrator password
- 6.1.4 Camera can not record
- 6.1.5 Subnet doesn’t match
- 6.1.6 No Pictures Problems
- 6.1.7 Can’t access IP camera in internet
- 6.1.8 UPnP always failed
- 6.1.9 Camera can not connect wireless
- 6.1.10 Can’t see other cameras listed in multi-dev
- 6.2 Default Parameters
- 6.3 Specifications
- 6.4 CE & FCC
- 6.5 Warranty
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
4
Bottom View
There are some labels located of the camera; this is an important feature of original Foscam cameras. If
your camera does not have labels, it may be a clone. Cloned Foscam cameras can not use original
firmware and are not eligible for warranty or technical services.
1.Mounting Port: Port for mounting bracket
2.Reset Button: Push and hold for more than 5 seconds to set the camera to factory default
NOTE:
The different features between the models involved.
Model
Maxmium
Resolution
3x Optical
Zoom
Micro SD
Card Slot
Antenna
P2P
FI9821P
1280*720
×
√
Detachable
√
FI9826P
1280*960
√
√
Detachable
√
FI9831P
1280*960
×
√
Detachable
√
FI9816P
1280*720
×
√
Detachable
√
The flashing status of the Power light and Network light are shown in the following table.
Light
Flashing Status
Description
Power light
off
The power don't work properly.
on
The power supply works fine.
Network light
off
No Wireless connection
Slow Flash once per second
Wireless connection
Flashing every 0.4 seconds
WPS is connecting
Flashing every 0.2 seconds
EZLink takes effect
Constant for 3 seconds one time
Reset to take effect
1.Mounting Port
2.Reset Button