Operation Manual

NVR User Manual
www.foscam.com
12
WARNING
 Before installing a hard disk drive (HDD), please make sure the power is disconnected from
the NVR.
 Find the ESD gloves from the package of the NVR and wear the gloves.
1.Remove the cover from the NVR by unfastening the screws on the rear and side.
2. Connect one end of the data cable and power cable to the motherboard of NVR and the other
end to the HDD.
3. Place the HDD on the bottom of the device using the provided screws and then fasten the
screws on the bottom to fix the HDD.
4. Re-install the cover of the NVR and fasten screws.