Operation Manual

NVR User Manual
www.foscam.com
15
ALARM out Interfaces
Connector for alarm output. Output alarm signal to
the external alarm device. The external alarm
device needs a power supply.
NO: alarm output end that is always on.
C: common alarm output end.
2.1.4 IR Remote Control Description(Only FN3104H)
The NVR may also be controlled with the included IR remote control.
Note: Make sure you have installed batteries properly in the remote control. And you have
to aim the remote control at the IR receiver in the middle position of the front panel.
No.
Name
Description
1
Power
Power on/off the device.
2
Recording
Manual Start/Stop recording in the Live
view Interface. It is used with direction
keys.
3
Playback
Enter the Playback interface, it is used
with direction keys.
4
NO. (0-9)
Inputting numbers and characters in
editable box, or channel switch.
5
Switch
Switch from single screen and
multi-screen in preview mode.
6
MENU
Enter the shortcut menu of setting
interface. It is used with direction keys.
7
SEQ
Enable or Disable channel touring
according to the touring settings;
Press the ESC button to stop.
8
Manageme
nt
Enter the IPC Management interface, it is
used with direction keys.
1