Operation Manual

NVR User Manual
www.foscam.com
20
Connect to the Power Supply
You should first make sure that the AC voltage connected with the NVR power adapter
matches with the requirements. And then connect the power adapter to power input
interface of NVR, the power status indicators on the rear panel will light in green,which
means that the power supply is properly connected.
Note
Please use the NVR power adapter provided in the package.
Network Access
During the network connection, you should provide sufficient bandwidth to ensure the
fluency and clarity of the images transmitted over the network.
Connect to the Video Output Device
Connect the VGA Monitor to VGA interface of NVR, or Connect the HDMI Monitor to HDMI
interface of NVR.
Connect to the Mouse
Plug USB mouse into one of the USB interfaces of the NVR.
Connect to the Storage device
Plug USB Storage device into one of the USB interfaces of the NVR.
2.3 USB Mouse Operation
Plug USB mouse into one of the USB interfaces on the rear panel of the NVR.
The mouse should automatically be detected.
The operation of the mouse:
Name
Action
Description
Left-Click
Single-Click
Menu or window: select and enter.
Double-Click
Preview mode or Playback mode: Switch between
single-screen and multi-screen.