Operation Manual

NVR User Manual
www.foscam.com
38
Time Zone
Please select the time zone according to the actual situation.
Automatically
synchronize
with and
Internet time
server
Whether synchronize your NVR with an Internet time server.
Check: You need to configure the NTP Server.
Uncheck: You need to configure the Date and Time.
Date Format
You need to configure the date format.
Time Format
You need to configure the time format.
OverWrite
When the HDD is full. You can select the whether cover the earliest
recording.
Language
Configure the language of the NVR interface.
Setup Wizard
Whether to enable startup wizard when the NVR system starts
again.
Synchronize
time to camera
Time set by the NVR system. Whether to synchronize the time to the
connected IPC device.
Pre-recorded
time
Pre-recording time. When recording is performed, the system starts
recording n seconds before recording is enabled.
Click Save button to take effect.
Stream
Choose ”Menu > Settings > Stream” in the Menu interface. The Stream interface is
displayed.
You can configure the encoding scheme parameters of the IP Camera, the NVR system will
synchronize your IP camera with encoding scheme.