Operation Manual

NVR User Manual
www.foscam.com
45
Click Save button to take effect.
Click E-Mail Test to see if Mail has been successfully configured.
If the test success, you can see the success information, at the same time the receivers
will receive a test mail.
【FTP】
Check the FTP checkbox, you can configure the FTP information of the NVR.
The system can be configured to send an picture to the FTP server if an alarm or motion
event is detected etc..
Click Save button to take effect.
Parameter
Description
FTP Address
 If your FTP server is located on the LAN, you can set FTP
address as ftp://IP address/dir.(eg.ftp://192.168.1.103/dir).
 If your FTP server is located on the WAN, you can set FTP
address as ftp://domain name/dir.(eg.ftp:test.no-ip.org/dir).
FTP Port
Default port is 21.You can also change this port manually
through FTP server.
FTP Mode
Here supports two modes: PORT and PASV.
FTP Username
The user account of FTP server.
FTP Password
The user password of FTP server.