Operation Manual

NVR User Manual
www.foscam.com
47
External alarm input devices are connected through the alarm input interface and external
alarm output devices are connected through the alarm output interface. After the devices
are connected successfully, you can configure information about the external alarm
devices. When an external alarm input device triggers an alarm, the NVR system transmits
the alarm information to an external alarm output device, which makes corresponding
response.
In the live view mode, there are icons at the right bottom of the screen for each channel.
 The Icon indicate alarm was triggered.
 The Icon indicate the IPC is recording.
Step1 Select the Alarm Input from drop-down box list.
Step2 Check the Enable checkbox to enable IO Alarm function.
Step3 Set Detection Schedule
1． Click Settings button for the Detection Schedule.
Set up arming schedule of the channel for the IO alarm.
You can choose a week, one day of a week, the certain time period for the motion
detection alarm.
2． Check Select checkbox to select the area.
3． Drag and draw the area for motion detection by left mouse.
Note:Check Clear checkbox and If you clear the area, then drag and draw the area by