Operation Manual

NVR User Manual
www.foscam.com
50
Step2 Check the checkbox to enable motion detection function.
Step3 Check the checkbox to select the linkage method. You may refer to follow table for details of
linkage methods.
Step4
Set Detection Area.
1． Click Set button and it pop up a window.
2． Drag and draw the area for motion detection by left mouse.
3． Right-click with your mouse to save and quit. When something moving in the
detection area, the NVR will alarm.
Step5 Set Detection Schedule.
1． Click Settings button for the detection schedule.
Parameter
Description
Record
If you select this checkbox, when the Motion detection is
triggered, the NVR will record automatically and store the
record files to the HDD.
IPC Audio Warning
If you select this checkbox, when the Motion detection is
triggered,the people around the camera will hear beep alarm
sound of the IPC.
Buzzer
When the Motion detection is triggered, you can choose
whether to enable buzzing sound of the NVR device.
Alarm Output
When the IO Alarm is triggered, you can choose whether to
alarm via the alarm output device.
Note: Make sure you have installed the alarm output device.
FN3004H do not support Alarm Output function.
Send E-Mail
When the Motion detection is triggered, you can choose
whether to send e-mail.
Note: Make sure you have set Email.
FTP
When the Motion detection is triggered, you can choose
whether to upload detection picture to FTP server.
Note: Make sure you have set FTP.