Operation Manual

NVR User Manual
www.foscam.com
63
2
Channels
In channels of the NVR, you can add IPC
devices. The FN3109H supports 9 channels, the
FN3104H and FN3004H support 4channels.
Note: If you need to display nine channels IPC
device on the live view window, the sub stream of
each IPC must be less than 720P.
Play
Play an IPC monitoring video in a channel of the
NVR. By default, the video is played.
Stop
Stop playing the monitoring video in the channel.
Take
Snapshot
Select the channel, click this button, and you can
take a snapshot of the monitoring video page of a
corresponding channel to the local computer. You
can set the storage path, refer to the "Web >
Parameter configuration > Settings > Storage
Location".
Record
Click this button to manually record the content
on the monitoring page. The recorded content is
stored in the HDD of the NVR.
3
Optical Zoom
Click this button, the IP Camera lens focal will be
bigger or smaller, you can adjust the focal length,
according to the target object distance to obtain
high-resolution images.(only supported with
zoom function of IPC).
PTZ
The configuring of the PTZ parameters should be
done before you control the PTZ camera.
Use the directional button to wheel the camera to
the location where you want to set preset.
indicates the IP camera go to the default center.
Only the IP camera with PTZ supports this
feature.
4
Preset
You can configure the preset and cruise of the IP
Camera.