Operation Manual

NVR User Manual
www.foscam.com
76
IP Camera Setup page is displayed.
Step1 You can see all IP Cameras searched in The Current LAN IPC List.
Step2 Select one channel from Channels.
Step3 Choose the IP Camera in the list of ‘The Current LAN IPC List’ .
Choose the Protocol from the drop list. Input the Username and Password of the IPC.
Select the FOSCAM protocol for Foscam brand IPC, and select the ONVIF protocol for other
brands IPC.
Step4 Click Add button to finish adding.
-------End
【Manually Adding IPC】
You can also manually add the IPC device. After select any one of the channels, input
information of the IPC. Then click Add button to finish adding.
Hard Disk Information
You can configure the Disk Saturation, Pre-recorded Time for HDD information.
Step1 Choose ” (Parameter Configuration) > Device Management > Hard Disk Information”.
The Hard Disk Information page is displayed.