Operation Manual

NVR User Manual
www.foscam.com
77
Step2 You can configure the following settings.

Format Hard Disk: Click the Format Hard Disk button to initialize the SATA disk for
recording.
Note: Initializing the HDD will erase all the data saved on it, please backup the data
before formatting hard disk if necessary.

Disk Saturation:When the disk is saturated, you can choose to stop recording or cycle
coverage.

Pre-record Time:The time you set to record before the event.
For example, when an alarm triggered the recording at 11:00, if you set the pre-record
time as 5 seconds, the camera records it at 10:59:55.
Step3 Click Save button to take effect.
-------End
Storage Location
You can configure the storage location for snap picture and backup record file.
Choose “ (Parameter Configuration) > Device Management > Storage Location”. The
Storage Location page is displayed.
Snapshot Pictures To: Click the icon (Take Snapshot) in the Real time Preview page or
Playback page, the snapshot picture will be saved to the Snap Picture Path in the local
computer.