Operation Manual

NVR User Manual
www.foscam.com
78
4.4.3 Service Configuration
Motion Detection
Follow the steps to set the motion detection parameters. In the live view mode, once a
motion detection event takes place, the NVR can analyze it and perform many actions to
handle it. Enable motion detection function can trigger certain channels to start recording,
or trigger full screen monitoring, output alarm, send Email, upload FTP, buzzer alarm and
so on.
In the live view mode, there are icons at the right bottom of the screen for each channel.

The Icon indicate alarm was triggered.

The Icon indicate the IPC is recording.
You can follow the steps to schedule a record which triggered by the detected motion.
Choose ” (Parameter Configuration) > Service Configuration > Motion Detection”. The
Motion Detection page is displayed.