Operation Manual

NVR User Manual
www.foscam.com
80
Step5 Set Detection Area
1． Click Set Detection Area button and it pop up a window.
Parameter
Description
Alarm output
When the IO Alarm is triggered, you can choose whether to alarm via
the alarm output device.
Notes:
FN3004H do not support Alarm output function.
Make sure you have installed the alarm output device.
Send E-Mail
When the Motion detection is triggered, you can choose whether to
send e-mail.
Note: Make sure you have set Email.
FTP
When the Motion detection is triggered, you can choose whether to
upload detection picture to FTP server.
Note: Make sure you have set FTP.
Record
If you select this checkbox, when the Motion detection is triggered,
the NVR will record automatically and store the record files to the
HDD.
Record Time
When you check the Record, you need to configure motion
detection recording time.
Buzzer
When the Motion detection is triggered, you can choose whether to
enable buzzing sound of the NVR device.
IPC Audio
Warning
If you select this checkbox, when the Motion detection is triggered,
the people around the camera will hear beep alarm sound of the
IPC.