User Manual Model: FN7108W-B4 Version: 1.
NVR User Manual Table of Contents Table of Contents...............................................................................................................................................I Security Warning.............................................................................................................................................IV Preface....................................................................................................................................................
NVR User Manual 2.5.2 Display.................................................................................................................................... 21 2.5.3 Record.................................................................................................................................... 23 2.5.4 Backup.................................................................................................................................... 23 2.5.5 Network......................................
NVR User Manual 4.3.2 Manual add............................................................................................................................ 42 4.4 Surveillance Software GUI............................................................................................................. 45 5 Appendix........................................................................................................................................................49 5.1 HDD Capacity Calculation.................
NVR User Manual Security Warning Please change the password of your Foscam NVR App account, and NVR and cameras user name regularly. The password should contain a combination of numbers, letters and special characters. Please keep the user name and password of your cameras, NVR and Foscam NVR App account safe. Please update your camera to the latest firmware regularly for an optimal user experience. www.foscam.
NVR User Manual Preface Welcome to use our product, Network Video Recorder (NVR) Kit. This document mainly focuses on the installation and configuration of NVR Kit application system. With high performance video, user-friendly GUI, and practical industrial designs. This series NVR Kit is suitable for civil applications such as homes, stores, internet cafes, and small businesses in addition to mainstream security and surveillance applications.
NVR User Manual Important Safety Instructions This chapter describes how to use the product properly so as to prevent danger and property loss. Be sure to follow the security instructions when operating this product. The CR2032 model lithium battery is used inside the device. If other types of batteries are used, there is a danger of explosion. When replacing the battery, do not put the old battery into fire or handle it with household garbage.
NVR User Manual 1 Overview 1.1 Product Introduction The series of product is a NVR Kit. This advanced product series receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). The product can perform live video preview, recording, playback, remote access, and backup simultaneously. 1.
NVR User Manual After the Shelter is enabled and recording is selected, If the video is occluded, the video channel will have an alarm flag alert that triggers an alarm and alarm logging will be enabled. Note When NVR system time and IPC time are different, the NVR recording will based on the NVR system time. Playback You can play recording video files stored in the Hard disk. Recording includes schedule recording, manual recording, motion recording and alarm recording.
NVR User Manual 1.3 Relevant Version Name Recommended Configuration You are recommended to equip a 16:9 monitor with the resolution higher than Monitor 1920 *1080. Network 10/100M Ethernet or above. www.foscam.
NVR User Manual 2 GUI You can visit the local NVR device via the display or monitor, and view or manage NVR system. NVR device is connected to the network, mouse, and mobile storage devices have been successfully installed. Make sure the video output device is connected successfully. 2.1 Before Starting You need to know some basic information before you log on to the NVR system with the monitor or display. 2.1.
NVR User Manual If the power LED indicator on the front panel is off, please check if the power supply is plugged into an electrical outlet; Shutting Down the NVR Proper ways to shut down the NVR in the GUI interface: After login, right-click the mouse, you can click Shutdown in the shortcut menu. Choose Shutdown, click the OK button in the confirmation box. Then turn off the power switch on the rear panel, the power LED indicator on the front panel turns off.
NVR User Manual Menu: Exit current menu to upper level menu. Note The Single-Click mentioned in this article is refer to the left mouse click. 2.2 Login For your security, please set a new password for your NVR before Log In. Login page. Enter the Username and Password, then click on the OK button. You will be taken to the Setup Wizard. 2.3 Guide By default, the Guide starts once the NVR has loaded. The Guide can walk you through some important settings of the NVR.
NVR User Manual 2. Format HDD. Click the Format button to set up the HDD. Note that this will delete all files on the HDD. HDD Full Setting. Select Stop Record and Overwrite. 3. Network You can set up the network information for the NVR. 4.P2P. If you want to know the UID of the device, please scan the QR code. If you don’t want to use the Setup Wizard next time, check Not show again checkbox. Click the Finish button to complete the setup wizard. www.foscam.
NVR User Manual Or Right-click “Main Menu > Configuration”, uncheck the Setup Wizard checkbox. Click the Save button. 2.4 Shortcut Menu After login, right-click the mouse, you will enter the shortcut menu. Right-click in live view mode and select screen from the Shortcut Menu, you can choose 4-screen, 8-screen or 9 screens. www.foscam.
NVR User Manual 2.4.1 Pair IP Camera Right-click in live view mode and select Pair IP Camera to enter the Pair IP Camera interface, On this page you can see device status such as channel, Status, MAC Address, Remove and Add IP Camera. Note The NVR and IP Camera are already paired. If you need to match more cameras (Only FI9910W), please refer to the following steps. Click Pair button and press the Reset button of the camera tail cable at the same time, until it prompts that the pairing is successful.
NVR User Manual Auto Bridge By new mesh network auto-bridging function, without any manual setting, wireless camera in further area will have a judgment about the WIFI signal and auto connect to the camera which have a better WIFI signal, to achieve more stable and reliable video transmission. Auto bridging is designed to expand the coverage area of wireless signal, instead of enhancing the signal.
NVR User Manual 2.4.2 Menu Right-click in live view mode and select Main Menu to enter the Main Menu interface, it includes Configuration, Display, Record, Backup, Network, HDD, User, Event, Restore, Upgrade, IPC Config, please refer to 2.5 Main Menu. 2.4.3 Playback You can display the video of every a channel for playback. Right-click in live view mode and select Playback to enter interface. It supports single-screen, four screens or nine screens.
NVR User Manual Button / Description After select the matched recorded file, click the button to play or pause. Stop Single Frame Fast backward. The fast backward speed can be 4 times, 8 times or 16 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the lower right of the fast backward icon. For example, indicates the current fast backward speed is four times of the normal speed. Fast forward.
NVR User Manual after the backup is complete 2.4.4 Record Right-click in live view mode and select Record to enter Record interface. Choose recording channel, click Save button (Actually, the Wi-Fi NVR system have default set 24h scheduled recording). If you want to modify it to alarm recording, please use the left mouse button to select the time (turned to green), if the other channels operate in the same way, select copy button. www.foscam.
NVR User Manual If you want to check the record, right-click in live view mode and select “Main Menu > Playback”. Choose channel and date, then click timeline to check record. 2.4.5 Backup Insert USB flash drive to the USB port located at the rear of your NVR. Right-click in live view mode select Backup to enter the Backup interface. Step 1: Choose channel, type and time. Step 2: Click Search button. Step 3: Select target file. Step 4: Click Backup button to finish backup.
NVR User Manual 2.4.6 PTZ Control NVR can operate the lens steering of IPC, which must support PTZ function. 2.4.7 IPC Config Right-click in live view mode and select IPC Config to enter the IPC Config-1 interface. You can set the Image, OSD, Encode, Advanced, Maintenance for the IPC. Image Choose Image to enter the Image interface, On this page you can adjust the image color mode of the monitor channel. www.foscam.
NVR User Manual OSD Choose OSD to set the information on the screen for the IPC. Encode Choose Encode to set the information for the main stream and the sub stream. Note FN7108W-B4 kit will automatically configure the main/sub stream information according to the network environment, so it is not editable here. Advanced www.foscam.
NVR User Manual Step 1: Choose Advanced to set the Motion Detection Record for the IPC. Step 2: Right-click in live view mode and select “Main Menu > IPC Config > Advanced”. Step 3: Choose Enable from the Motion Detect. Step 4: Set Sensitivity, Region, Body Filter, Body Rectangle. Step 5: Click Apply button. Maintenance Choose Maintenance to set up the upgrade information for the IPC. Step 1: Download the firmware to the USB flash drive. Step 2: Insert USB flash drive to NVR USB port.
NVR User Manual Note The upgrade file must be placed under the root directory of the USB flash drive. Don't lose power for during upgrade. IPC Restore default: Step 1: Right-click in live view mode and select “Main Menu > IPC Config > Maintenance”. Step 2: Click CH to restore default this camera or click Select All to restore default your all cameras. Step 3: Click Restore IPC button. www.foscam.
NVR User Manual 2.4.8 Info Right-click in live view mode and select “Info > log”, you can search the log information of the NVR. The log record shows recording time and accessed information. If you want to back up the log information, please insert USB flash drive to the USB port located at the rear of your NVR, and then click the Backup button. Right-click in live view mode and select “Info > Version”, you can view the version information of the NVR. 2.4.
NVR User Manual Click Restore,The Restore factory settings interface is displayed. You can check some information to restore the factory settings, as shown in the figure below. 2.5 Main Menu Right-click in live view mode and select Main Menu from the Shortcut Menu, the Main Menu interface is displayed. www.foscam.
NVR User Manual 2.5.1 Configuration Right-click in live view mode and select “Main Menu > Configuration” in the Main Menu interface. The Configuration interface is displayed. You can set the system time, date format, language, resolution of the monitor and so on. If you don't want to display the startup wizard every time you turn it on, please uncheck the Startup Wizard checkbox. 2.5.2 Display Right-click in live view mode and select “Main Menu > Display” in the Main Menu interface.
NVR User Manual Right-click in live view mode and select “Main Menu > Display > Tour” in the Main Menu interface. The Tour interface is displayed. After the user sets the Tour function, NVR will play several channels of video on the display at the same time according to the interval time set by the user. After each channel plays for a few seconds, it will automatically jump to the next group of channels for cyclic playback. Step 1: Check the Enable. Step 2: Set the Interval(sec).
NVR User Manual 2.5.3 Record Right-click in live view mode and select “Main Menu > Record” in the Main Menu interface. The Record interface is displayed. Choose recording channel, click Save button. (Actually, the Wi-Fi NVR system have default set 24h scheduled recording). If you want to modify it to alarm recording, please use the left mouse button to select the time (turned to green), if the other channels operate in the same way, select copy. 2.5.
NVR User Manual The Backup interface is displayed. Step 3: Choose channel, type and time, Click Search button. Step 4: Select target file. Step 5: Click Backup button. = Note If target file can not be searched out, please click Empty →Add. Please remove the files which is no need before backup. Ensure insert device (like USB) in 30 second, as system reserved searching time for it is 30 second. 2.5.5 Network Right-click in live view mode and select “Main Menu > Network” in the Main Menu interface.
NVR User Manual 2.5.6 HDD Right-click in live view mode and select “Main Menu > HDD” in the Main Menu interface. The HDD interface is displayed. When the HDD is full, you can select the cycle cover the earliest recording or stop recording. You can set the video storage time. Click the Format button, you can also format the hard drive. www.foscam.
NVR User Manual 2.5.7 User Right-click in live view mode and select “Main Menu > User” in the Main Menu interface. The User interface is displayed. You can add user, delete user, modify user and change password. Add User Click Add User to enter the Add User interface, On this page you can add to user, user password and Authority Option. Modify User www.foscam.
NVR User Manual Click Modify User to enter the Modify User interface, On this page you can change user password and authority option. Delete User Click Delete User button to delete a user. Change Pwd Click Change Pwd button to change password. 2.5.8 Event Right-click in live view mode and select “Main Menu > Event” in the Main Menu interface. The Motion Detect interface is displayed. On this page you can setting Channel, Scheduled, Delay and Event Trigger mode.
NVR User Manual If you want to set other channels to be the same, you can select the "Copy To" , then click Copy button. 2.5.9 Restore factory settings Right-click in live view mode and select “Main Menu > Restore factory settings” in the Main Menu interface. The Restore factory settings interface is displayed. On this page you can choose which you can restore the factory settings. www.foscam.
NVR User Manual 2.5.10 Upgrade You can upgrade your NVR system with local Software. Step 1: Download the firmware to the USB flash drive. Step 2: Insert USB flash drive to the USB port located at the rear of your NVR. Step 3: Right-click in live view mode and select “Main Menu > Upgrade” in the Main Menu interface. Step 4: Click Refresh button in the Upgrade interface. Step 5: Select the firmware from the USB flash drive. Step 5: Click Upgrade to upgrade your NVR.
NVR User Manual 2.5.12 Channel Config Right-click in live view mode and select “Main Menu > Channel Config” to enter the Pair IP Camera interface . please refer to 2.4.1 Pair IP Camera. www.foscam.
NVR User Manual 3 Access the NVR in Foscam App 3.1 Download the Foscam APP Please refer to the Quick Setup Guide if you install the NVR for the first time. You can start to learn about software operation after finish quick installation. Scan the QR code below to download and install the Foscam APP. 3.2 Create A Foscam Account You can create a Foscam account for the first time. Run the Foscam APP, and then register for a Foscam account. Step 1: Click Foscam app icon to enter the login page.
NVR User Manual Step 4: The system will send activation information to your mailbox, and you need to log in to your mailbox to activate your account. 3.3 Add Device in Foscam App Open the foscam APP and please sign in if you have one already. After logging into Foscam APP, select "+" icon on the upper right corner. The Add Devices interface is displayed. Note Please make sure that the NVR and your phone are both in the same Local Area Network (LAN). You have the following methods to add devices.
NVR User Manual Select “Search in LAN” to search for the device. Select “Others”, You can manually add device information in three ways: UID/DDNS/IP Address. Note FN7108W-B4 kit does not support DDNS connection. After the addition is successful, NVR video will be displayed in the Foscam app. 3.4 Foscam APP Surveillance Window You can start to learn about software operation after finish quick installation.When you launch the Foscam App, the devices page displays.
NVR User Manual Setting Back Date Resolution Full screen Bit Rate Snapshot Video Mirror Back: To stop viewing and listening to the live feed, tap the Back. Resolution: There are two types to identify different streams you have set. If select the FHD Mode, the clearer video will become, and it will take up more bandwidth; If select the SD Mode, the video will not be as clear as FHD Mode, and it will take up less bandwidth.
NVR User Manual 3.6 Setting Tap the button, goes to Settings to make advanced NVR settings. 3.6.1 NVR Info You can modify the NVR name. You can also see the basic information of the NVR through this, such as NVR model, UID, MAC ID, NVR firmware version information, IPC firmware version information. 3.6.2 NVR Firmware You can see the current NVR's firmware version and whether there is new software that needs to be upgraded.if there is new firmware, you can click the “Upgrade” button to upgrade. www.
NVR User Manual 3.6.3 Camera Firmware You can see the current camera's firmware version and whether there is new software that needs to be upgraded.if there is new firmware, you can click the “Upgrade” button to upgrade. 3.6.4 Recording Playback You can query the recording playback content according to the time, type, and channel. 3.6.5 Hard disk information When the HDD is full, you can check the Loop Coverage to select the cycle cover the earliest. You can see the HDD information of the NVR.
NVR User Manual 3.6.6 Reboot NVR Click Reboot NVR to reboot the NVR. This is similar to unplugging the power to the NVR. 3.6.7 Delete NVR You can click Delete NVR button to delete the NVR from the app, or delete and keep history files from the app. www.foscam.
NVR User Manual 4 Surveillance Software Foscam VMS Foscam VMS is a new tool for PC. It does not require plug-ins and is compatible with Windows & Mac, It supports all Foscam HD cameras and up to 36 cameras at the same time. It is recommended that you first use the cloud account registered by the Foscam app, and then use the local account. 4.1 Software Installation If you would like to manage multiple cameras, we suggest you install the Foscam VMS.
NVR User Manual Step 2: Click Login with Local Account to enter the Create A Local Account interface. Step 3: Enter the account and password, then click Create button. Step 4: Click Confirm button to enter the main interface. www.foscam.
NVR User Manual 4.3 Add Device If your NVR is wired connect, you can choose the following method to add to FoscamVMS. 4.3.1 LAN Add Click Add Device button, then follow below steps: Step1 Select “ALL” from the device types. Step2 Click the IP address of the NVR on the list, then the name of the NVR and the IP information will be entered automatically. www.foscam.
NVR User Manual Step 3 Click Add. Step 4 Enter the username and password of the NVR. Step 5 Click Add button to finish adding. www.foscam.
NVR User Manual 4.3.2 Manual add You can add the NVR use manual add. Step 1 Click Manual add first. Step 2 There are three ways to connect mode, you can choose any one. Check UID from Connection mode. Enter the UID of the device. www.foscam.
NVR User Manual Check DDNS from the Connection Mode. Enter the DDNS and Port of the NVR. Select NVR from the Device types. Note FN7108W-B4 kit does not support DDNS connection. Check IP address from the Connection Mode. Enter the IP and Port of the NVR. Select NVR from the Device types. www.foscam.
NVR User Manual Step 3 Click Add button. Step 4 Enter Device account and Password of the NVR. Step 5 Click Add button to finish adding device. www.foscam.
NVR User Manual 4.4 Surveillance Software GUI 1 3 2 4 5 First time you login the software, the whole video window is gray, you need to connect the NVR and add NVR to it. Section1 Menu Bar Path to surveillance window. Click this button enter to Device List and back to the surveillance window. Playback the video recording, you can choose Cloud Playback, SD Card Playback, NVR HDD Playback or Local Playback. Login your Foscam cloud account to view alerts. Login your Foscam cloud account.
NVR User Manual Bar and Switch Account. Section2 Left Bar Add Group: Click the button, you can group the device list according to your needs. Left Bar of Live: You can view the list of connected NVRs. Select the icon on the right side of the NVR list to do the following. 1 2 3 4 5 1-----Reconnect Click Reconnect button and the device will reconnect. 2----- Move To Click this button, you can move the device to your group list.
NVR User Manual 1 2 1-----Close 4 3 Click the icon to close this channel live window 2-----Device Name Show view channel and camera name.
NVR User Manual Sound ----- Click the icon then you will hear sound captured by the camera's built-in microphone. You may need to plug in earphones or enable the computer speakers to hear from the camera's microphone. Make sure the camera supports audio. Click again and stop audio. Section4 The number of split-screen Click this button to select the number of split-screen on one page. The client can monitor many cameras at one page, here you can choose the display number. The maximum number is 16.
NVR User Manual 5 Appendix 5.1 HDD Capacity Calculation This chapter describes how to determine the size of the HDD you need when you install the NVR for the first time. The NVR adopts the MPEG4/H.264 compression technology and its dynamic range is large. Therefore, the capacity of the HDD depends on the estimated size of files generated in each channel every hour according to code streams.
NVR User Manual Whole HDD Capacity(M)=4*168(hour)*1800 (M/hour) =1209600M, 1209600M= 1209600M =1181.25G 1024 According to the preceding calculation result, you are advised to buy a HDD of 1.5 TB or above. 5.
NVR User Manual Internet Viewing N/A Smart phone iOS, Android, 3G/4G Smartphones 13 languages （Chinese、English、Russian、Japanese、Arabic、 Language Language Spanish、German、Portuguese、French、Korean、Italian、Thai、Romanian） Power Supply DC 12V/2A Dimension(LxWxH) 234mm*234mm*52mm Net Weight (g) 660g Operating Temperature 0°C ~ 55°C (32°F ~ 131°F) Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Model FI9910W Se
NVR User Manual www.foscam.
NVR User Manual 5.3 FAQ 1. No image displayed on the monitor after starting up normally. Verify the device is connected with the monitor via HD-OUT or VGA cable. Verify the connection cable is good. Verify Input mode of the monitor is correct. Please check the input mode of the monitor matches with the output mode of the device (e.g. if the output mode of NVR is HD-OUT output, then the input mode of monitor must be the HD-OUT input). And if not, please modify the input mode of monitor. 2.
NVR User Manual 5.4 Glossary Acrony Term Description Dynamic Domain Dynamic DNS is a method, protocol, or network service Name Server that provides the capability for a networked device, such m DDNS as a router or computer system using the Internet Protocol Suite, to notify a domain name server to change, in real time (ad-hoc) the active DNS configuration of its configured hostnames, addresses or other information stored in DNS.
NVR User Manual 5.5 CE & FCC Electromagnetic Compatibility (EMC) FCC Statement This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
NVR User Manual returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your Foscam product from online store, please contact the point-of-purchase and ask for return / replacement / repair service. Limited Hardware Warranty The products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of Foscam.
NVR User Manual for sending back the replacement unit to customers. If for any reason, we are unable to provide a replacement of the original returned item(s). You will have a choice for a "Substitute" item at the same equal value. We do not provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the product is delivered.
NVR User Manual Repair Service Out Of Warranty FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM. Different region may have different service fee, please contact the point-of-purchase to confirm that before you ask for this service.
NVR User Manual 5.7 Statement You are advised to be cautious in daily life, keep personal account information carefully, do not share personal account easily. Change passwords of your account and equipment periodically, and upgrade equipment firmware to strengthen security consciousness. Our company makes no warranty, implied or otherwise, that this product is suitable for any particular purpose or use. You need to abide by the relevant laws and regulations of the use restrictions when using products.
NVR User Manual The company reserves the right of final interpretation on our products. 5.8 Obtaining Technical Support While we hope your experience with the NVR is enjoyable and easy to use, you may experience some issues or have questions that this User's Guide has not answered. If you have problem with device, please first contact reseller for solving the problems. If our reseller cannot provide service, please contact our service department: support@foscam.
