Manual

NVR User Manual
www.foscam.com
29
2.5.10 Upgrade
You can upgrade your NVR system with local Software.
Step 1: Download the firmware to the USB flash drive.
Step 2: Insert USB flash drive to the USB port located at the rear of your NVR.
Step 3: Right-click in live view mode and select “Main Menu > Upgrade” in the Main Menu
interface.
Step 4: Click Refresh button in the Upgrade interface.
Step 5: Select the firmware from the USB flash drive.
Step 5: Click Upgrade to upgrade your NVR.
Note
Don't shut down the power during upgrade. After upgrading, NVR restarts.
2.5.11 IPC Config
Right-click in live view mode and select “Main Menu > IPC Config”, you can set the Image, OSD,
Encode, Advanced, Maintenance for the IPC. For detailed operation, please refer to 2.4.7 IPC
Config.