Operation Manual

Wireless N300 High power Router
.
14
PPTP
Select PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a PPTP connection. The PPTP allows you to connect a router to a VPN server.
For example:
A corporate branch and headquarter can use this connection type to implement mutual and secure access to each other’s resources.
 Internet connection Type: Displays the current Internet connection type.
 PPTP Server Address: Enter the IP address of a PPTP server.
 User Name: Enter your PPTP User Name.
 Password: Enter the password.
 MTU: Maximum Transmission Unit. DO NOT change it from the factory default of 1492 unless instructed by your ISP. You may need to
change it for optimal performance with some specific websites or application software that cannot be opened or enabled; in this case, try
1450, 1400, etc.
 Address Mode: Select "Dynamic" if you don’t get any IP info from your ISP, otherwise select "Static". Consult your ISP if you are not
clear.
 IP Address: Enter the IP address provided by your ISP. Consult your ISP if you are not clear.
 Subnet mask: Enter the subnet mask provided by your ISP.
 Gateway: Enter the WAN Gateway provided by your ISP. Consult your ISP if you are not clear.