Operation Manual

Wireless N300 High power Router
.
18
1.5 LAN Settings
Click Advanced > LAN Settings to enter the screen below:
 LAN MAC Address: Displays device's LAN MAC address, which is NOT changeable.
 IP Address: Device's LAN IP address. The default is 192.168.0.1. You can change it according to your need.
 Subnet Mask: Device’s LAN subnet mask, 255.255.255.0 by default.
 OK: Click to save your settings.
Note：
If the default IP address is changed, you must enter the new IP address to log in.
1.6 DNS Settings
DNS is short for Domain Name System or Domain Name Service.
 Enable Manual DNS Assignment: Check to activate DNS settings.
 Primary DNS Server：Enter the primary DNS address provided by your IPS.
 Alternate DNS Server：Enter the other DNS address if your ISP provides such addresses (optional).
 OK: Click to save your settings.
Note:
 Web pages are not able to open if DNS server addresses are entered incorrectly.
 Do remember to reboot the device to activate new settings when you finish all settings.