Operation Manual

Wireless N300 High power Router
.
26
Note：
 When the settings finished, remember to enter Internet Connection Setup to set up Internet connection.
 Verify that the SSID, channel, and security mode on the page match those of the added wireless network. If not, manually correct them.
 For the normal wireless connection between two routers, do not change this router’s SSID settings, including SSID, channel, security mode
and security key.
Universal Repeater Mode
In this mode, the router will relay data to an associated root AP and AP function is enabled meanwhile. The wireless repeater relays signal
between its stations and the root AP for greater wireless range. Steps are shown as below:
1. Click Wireless>Wireless Extender, select Universal Repeater in the extender mode and click Open Scan.
2. Select the AP you wish to connect, such as Foscam-000248, click OK, and click Close Scan;