Operation Manual

Wireless N300 High power Router
.
40
4.6 Routing Table
This page displays the device core routing table which lists destination IP, subnet mask, gateway, hop count and interface.
The principal task for a router is to look for an optimal transfer path for each data packet passing through it, and transfer it to the specified
destination. To complete this work, the router stores and maintains related data of various transfer paths, i.e. establishing a routing table, for
future route selection.
５ Security
5.1 URL Filter Settings
To better control LAN PCs, you can use the URL filter functionality to allow or disallow such PCs to access certain websites within a specified
time range.
 Filter Mode: Select a proper filter mode, say, Forbid Only.
 Access Policy: Select an access policy number, say, 1, from the drop-down list.
 Policy Name: Briefly describe the current rule, say, yahoo, (It can only consist of numbers, letters, or underscore).
 Start IP/End IP: Enter the same IP address or 2 different IP addresses in both boxes to specify a single PC or a range of PCs for the current
rule to apply to.
 URL Character String: Enter the domain name you wish to filter out, say, yahoo.