Operation Manual

Wireless N300 High power Router
.
41
 Time: Specify a time period for a current rule to take effect. If the field is set to 0:00-0:00, the rule will be applied 24hrs/day.
 Day(s): Select a day or several days for a current rule to take effect. If Sun-Sat is selected, the rule will apply 7days/week.
 Enable: Check/uncheck to enable/disable the feature.
 OK: Click to activate your settings.
Example:
If you want to disallow all computers on your LAN to access youtube.com from 8：00 to 18：00 during working days: Monday- Friday, then do as
follows:
1) Filter Mode: Select Forbid Only.
2) Access Policy: Select an access policy number, say, 1, from the drop-down list.
3) Policy Name: Briefly describe the current rule, say, yahoo, (It can only consist of numbers, letters, or underscore).
4) Start IP/End IP: Enter 2-254.
5) URL Character String: Enter yahoo.
6) Time: Select 8:00-18:00.
7) Day(s): Select Monday to Friday.
8) Enable: Check the Enable box.
9) OK: Click to save your settings.
Note:
Each rule can only include one domain name. Simply add more rules accordingly, if you want to filter multiple domain names.
5.2 MAC Address Filter Settings
This section allows you to set the times specific clients can or cannot access the Internet via the devices’ MAC Addresses.
 Forbid Only: Specify a list of devices to Forbid access to the Internet. All other devices not listed as Forbidden will be permitted.
 Permit Only: Specify a list of devices to Permit access to the Internet. All other devices not listed as “Permitted” will be forbidden.
 Filter Mode: Select a proper filter mode, say, Forbid Only.
 Access Policy: Select an access policy number, say, 1, from the drop-down list.
 Policy Name: Briefly describe the current rule (It can only consist of numbers, letters, or underscore).
 MAC Address: Specify a MAC address for a corresponding MAC filter rule to apply to.
 Time: Specify a time period for a current rule to take effect. If the field is set to 0:00-0:00, the rule will be applied 24hrs/day.
 Day(s): Select a day or several days for a current rule to take effect. If Sun-Sat is selected, the rule will apply 7days/week.
 Enable: Check/uncheck to enable/disable the feature.
 OK: Click to activate your settings.
For Example:
To allow a PC at the MAC address of 00:E4:A5:44:35:69 to access the Internet from Monday to Friday.
1) Filter Mode: Select Permit Only.
2) Access Policy: Select an access policy number, say, 1, from the drop-down list.
3) Policy Name: Briefly describe the current rule, say, Permit_only, (It can only consist of numbers, letters, or underscore).
4) MAC Address: Enter 00:E4:A5:44:35:69.
5) Time: Select 0 for all fields to apply the rule 24hrs/day.
6) Day(s): Select Monday to Friday.
7) Enable: Check the Enable box.