Operation Manual

Wireless N300 High power Router
.
44
The factory default settings are listed below:
IP Address: 192.168.0.1
Subnet mask: 255.255.255.0
6.3 Backup/Restore
Backup: Once you have configured the device the way you want, you can save these settings to a configuration file on your local hard drive that
can be later imported to your device in case that the device is restored to factory default settings. To do so, follow instructions below:
1. Click the Backup button and specify a directory to save settings on your local hardware.
2. Click Save to download the configuration file.
To restore previous settings, do as follows:
Click the Browse button to locate and select a configuration file that is saved previously to your local hard drive.