Operation Manual

Wireless N300 High power Router
.
47
Note:
Configured time and date info will be lost when the device gets disconnected from power supply. However, it will be updated automatically
when the device reconnects to the Internet. To activate time-based features (e.g. firewall), the time and date info shall be set correctly, either
manually or automatically.
6.7 Change Password
This section allows you to change login password for accessing device’s Web-based interface for better security.
 New Password: Enter a new password, say, 12345 (Note that the password can only be alphanumeric).
 Confirm New Password: Re-enter the new password for confirmation.
 OK: Click to activate your settings.
Note:
For better security, it is highly recommended that you should change your device's default login password.
6.8 Upgrade
Firmware upgrade is released periodically to improve the functionality of your device and also to add new features. If you run into a problem
about a specific feature of the device, log on to our website (www.foscam.us) to download the latest firmware to update your device.
Note:
 Before you upgrade the firmware, make sure you have a correct firmware. A wrong firmware may damage the device.
 Do NOT upgrade the firmware wirelessly or disconnect the device from power supply while firmware update is in process. Note that you
need to update the device's firmware via a wired connection.
 Browse: Click to locate and select the firmware.
 Upgrade: Click to update firmware. Your device will restart automatically when its update completes.