Operation Manual

Wireless N300 High power Router

Chapter 2 Installation and Quick Setup Guide

1 Physical Installation

1.1 Preparation

Before connecting Ethernet cables, please verify the following items:

Item

Description

Wireless N300 High Power Router

Used with the provided power adapter

Installed with IE8 or other better web browsers.

Ethernet Cable

Used for linking the PC to the router

Broadband Service

Provided by network service corporation

Internet Connection Setup

 If you connect to the Internet using a broadband connection that requires a username and a

password provided by your ISP, please select PPPoE;

 If your ISP provides all the needed information: IP address, subnet mask, gateway address, and

DNS address(es), please select Static IP;

 If you can access the Internet as soon as your computer directly connects to an Internet-enabled

ADSL/Cable modem, please select DHCP;

 If your ISP uses a PPTP connection, please select PPTP;

 If your ISP uses an L2TP connection, please select L2TP;

PPPoE Dual Access (only supported in special Area e.g. Russia.).

1.2 Physical installation

1. Connect one end of the included power adapter to the device and plug the other end into a wall outlet nearby (Using a power adapter with a

different voltage rating than the one included with the device will cause damage to the device).