User Manual Outdoor HD IP Camera Model: FI9903P Model: FI9900P / FI9800P Model: FI9905B Model: FI9900EP / FI9901EP
Model: FI9803EP Model: FI9803P Model: FI9804W Model: FI9805W Model: FI9805E V3.8.
Table of Contents Security Warning...................................................................................................................................................................1 1 Overview............................................................................................................................................................................. 1 1.1 Key Features...............................................................................................................
6.4 CE & FCC............................................................................................................................................................. 82 6.5 WARRANTY......................................................................................................................................................... 83 6.6 Statement.............................................................................................................................................................
Security Warning 1.Please change the password of your camera regularly, using a combination of numbers, letters and special characters. 2.We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. 1 Overview FOSCAM Outdoor HD IP Camera is an integrated wireless IP Camera with a color CMOS sensor enabling viewing in High Definition resolution.
Supports IR-Cut and the filter change automatically Supports remote viewing & record from anywhere anytime Multi-level users management with password protection Motion detection alert via email or upload image to FTP Providing Phone apps for Android and iPhone users Supports multiple network protocols: HTTP / HTTPS / RTSP / TCP / IP / UDP / FTP / DHCP ONVIF Providing Central Management Software to manage or monitor multi-cameras Supports magic zoom (FI9900P, FI9905B, FI9900EP, FI9901EP) S
Mounting Bracket * 1 (except for FI9900P, FI9905B, G2, FI9900EP, FI9800P, FI9901EP) 1.5 Physical Description 1.5.
4 Induction IC Front Panel for FI9903P 1 2 3 1 LENS: CMOS sensor with fixed focus lens 2 Infrared Lamp Array 3 Induction IC Front Panel for FI9900P / FI9905B / FI9900EP / FI9800P / FI9901EP 1 2 3 4 1 WIFI Antenna: Wireless Antenna (FI9900P / FI9800P / G2) 2 Infrared LED: 30 IR LEDs 3 LENS: CMOS sensor 4 Induction IC 4
1.5.2 Interface 1 2 3 4 5 6 7 1 I / O alarm terminal block (Only FI9805E) This network camera provides a I/O alarm terminal block which is used to connect to external input / output device. The pin (there are four number in the terminal block from no. 1 to no. 4) definitions are as follows: 1– input 2- input 3- output 4- output This camera supports I/O alarm, you can go to Settings-Alarm - I/O page to configure it. 2 LAN 10/100M adaptive Ethernet interface.
Connect the external power adapter, request for 12V / 2A or 12V / 1A power. 5 Audio input interface (Except FI9803EP / FI9803P / FI9903P) The jack is used to plug external input device such as sound pick up device directly. Here microphone cannot directly insert to the interface, it must connect to adapter first. 6 Audio output interface (Except FI9803EP / FI9803P / FI9903P) The jack is used to plug external output device such as loud speaker directly.
FI9901EP / FI9900P / FI9905B / FI9900EP NOTE: When you re-install the camera, please ensure the tightness with the camera. 1.7 Wall Installation FI9803EP / FI9803P / FI9903P Step 1: Screw the mount on the wall with the 3 screws provided. Step 2: Install the camera on the mounting bracket with 1 screw to complete installation.
FI9800P / FI9900P / FI9905B / FI9900EP / FI9901EP Fixate the camera on your preferred location and use screws to mount it. We have provided screws in the Packaging. NOTE: Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring. These connectors are not weather-resistant. The cable of an outdoor camera should, from the position where the cable is divided into several cables, be fitted dry.
1.
2 Access the IP Camera 2.1 Hardware Connection & Software Installation 1. 2. 3. 4. Mount the antenna and make it stand vertically (Only for the device with external antenna). Connect the camera to the LAN network (Router or Switch) via network cable. Connect the power adapter to the camera. Visit Foscam official website http://www.foscam.
Double click the IP address of the camera; the camera login page should be open in your default browser. (2) Https:// LAN IP + Https Port no. The default HTTPS port NO. is 443. You can use the URL to access the camera: https:// LAN IP + HTTPS port NO. Go to Settings - Network - Port panel, you can see and change the HTTP and HTTPS port NO. NOTE: When logging in for the first time, you will need to download and install the add-on. 2.2.
2.3 Access the Camera in WAN 2.3.1 Static IP Addresses Users with static IP addresses after you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from Internet using the WAN IP address and port number. How to Obtain the WAN IP address from a public website ? To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The webpage at this address will show you the current WAN IP.
Videostream: Here support three modes: videoMain, videoSub and audio. When the network speed is bad, here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video. For example: IP: 192.168.1.11 Port number: 88 User name: admin Password: 123 Here I can enter one of the following URLs in the VLC. 1．rtsp://admin:123@192.168.1.11:88/videoMain 2．rtsp:// @192.168.1.11:88/videoMain 3．rtsp://:123@192.168.1.11:88/videoMain 4．rtsp://admin@192.168.1.
Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time preview.
If you cannot play the video in the VLC player, please check the port mapping. NOTE: If you modify the camera's username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 2.5 IP Camera Connection to the Server Device supports ONVIF 2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF.
3 Surveillance Software GUI Please refer to the section 2.1 if you install the camera for the first time. You can start to learn about software operation after finish quick installation. 3.1 Login Window Section1 Enter the Username and password The default administrator username is admin with no password, please change the password at first using and prevent unauthorized users login the camera. Section2 Stream The camera supports two stream modes: Main stream and sub stream.
After logging in for the first time, you will go to Setup Wizard automatically. Here you can set the basic parameters of camera, such as camera name, camera time, wireless settings, IP configuration. Country: Select the country. Device Name: You could give name for your camera. System Time: Select the time zone you need to set the date, time,format, etc.
Wireless networks: Click Scan, find the SSID of your wireless router, select and enter the password. IP: Set IP address of the camera. You could choose to obtain an IP automatically or set the IP address according to your needs.
NOTE: It needs about 1 minute to connect the camera to your router. 3.
FI9900P FI9905B FI9900EP FI9800P FI9901EP Section1 FOSCAM Logo / LiveVideo / Settings buttons : FOSCAM LOGO : Path to surveillance window. Click this button and back to the surveillance window : Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and do advanced settings. Section2 Multi-Device Window The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add other cameras in multi-camera panel.
WDR (Only FI9900P, FI9905B, FI9900EP, FI9901EP): WDR stands for High Dynamic Range. It usually refers to the method of capturing images having "greater dynamic range between the lightest and darkest areas of an image than current standard digital imaging methods or photographic methods". You can select ON from the dropdown list under sunlight or with bright background.
Section5 Cruise settings ( only F9805E) If via RS485 interface to connect an external PT device, you can use this feature. The default cruise tracks have two types: Vertical and Horizontal. Vertical: The camera will rotate from up to down. Horizontal: The camera will rotate from left to right. : Start cruise. : Stop cruise. If you want to define or change the cruise trace, please go to Settings PTZ Preset Settings panel.
Section7 Image quality settings In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality. Section8 OSD If you have added time and camera name in the video, you can see it in the live window. Go to Settings > Basic settings > Camera name panel, and you can change another device name. The default device name is anonymous. Go to Settings > Basic settings > Camera time panel and adjust the device time.
8------Full Screen Click it to make full-screen, or you can double click the surveillance screen to make full-screen. Double click again and exit full-screen. Onscreen Mouse Control Right click the mouse and you can adjust the screen ration, full screen and Zoom up. Keep Ration: Select it and the camera will adjust the size of live window based on the computer monitor automatically. Sometimes there is a black border around the video, please select Keep ration to get a better visual quality.
Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen. Zoom Up / Down: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. NOTES: 1. This camera don't support Pan / Tilt function, so here can not allow to use Screen PTZ. 2. For Mac OS, the plugin cannot support Onscreen Mouse function, so you cannot allow to use it.
4 Advanced Camera Settings Click the button Settings, goes to Administrator Control Panel to make advanced camera settings. 4.1 Setup Wizard The way to set it, you could refer to section 3.1. 4.2 Device Status Device Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera. 4.2.1 Device Information Camera Model: The model of the device.
the time. System Firmware Version: Display the System Firmware version of your camera. Application Firmware Version: Display the application firmware version of your camera. Plug-In Version: Display the plug-in version of your camera 4.2.2 Device Status On this page you can see device status such as Alarm status, NTP, WIFI status and so on. 4.2.3 Session Status Session status will display who and which IP is visiting the camera now.
4.2.4 Log The log record shows who and which IP address accessed or logout the camera and when. Click the page number and go to the corresponding page to see more logs . Fill in one page number, click Go button and go to the corresponding page . Reboot the camera and clear the log records. 4.3 Basic Settings This section allows you to configure your Camera Name, Camera Time, Mail, User Accounts and Multi-Device. 4.3.1 Camera Name Default alias is anonymous.
Time Zone: Select the time zone for your region from the drop-down menu. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Sync with PC / Terminal: Select this option to synchronize the date and time of the Network Camera with your computer. Manually: The administrator can enter the date and time manually. Please select the date and time format.
How to change the password? Firstly, select the account which you want to change the password, then select Change Password, enter the old password and the new password, lastly click modify to take effect. How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list.
Delete: Select the account which you want to delete, then click Delete button to take effect. NOTE: The default administrator account cannot be deleted, but you can add other administrator users. 4.3.4 Multi-Camera If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera.
1 Click it, camera model, alias, host and HTTP Port will be filled in the following boxes automatically . 3 Click Add to take effect . 2 Enter the User name and password of the 2nd camera . Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added.
4.3.5 Voice Prompt On this page, you can enable or disable voice prompt. Select “Yes” to enable or select “No” to disable. If select ”Yes”, you can hear the voice prompt after connect the audio output device.
4.4 Network This section will allow you to configure your camera's IP, PPOE, Wireless Settings, Port, Mail Settings and FTP Settings. 4.4.1 IP Configuration If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer. Changing settings here is the same as using the Equipment Search Tool. It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC.
Set the same Subnet Mask and gateway of the camera with your PC. There are two DNS servers. You can set any of them. Same with gateway is also OK. If you don't know the DNS server, you can use the same settings as the Default Gateway. 4.4.2 Wireless Settings (FI9803P / FI9804W / FI9805W / FI9900P / FI9905B / FI9800P) Step 1: Choose Settings on the top of the camera interface, and go to the "Network" panel on the left side of the screen, then click Wireless Settings.
your router in the list. Click the Scan button to search for wireless networks. Click the Page number to see other wireless networks devices if there are more than 10. Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network.
Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. The LAN IP address will disappear on the window of Equipment Search Tool when the camera is configuring a wireless connection.
Another way to change the HTTP port no. Step 1: Open the Equipment Search Tool, select the camera you would like to change the port of, right click on the IP address, and click on "Network Configuration", this brings up the network configuration box . Select which camera you’d like to change the port for, and right click . Modify the Http Port . Enter the Username and password, click OK.
address is now fixed at a static IP address of http://192.168.1.105:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address! Figure 4.
2-----SMTP Username / password ID account and password of the sender email address 3----- Sender E-mail Mailbox for sender must support SMTP 4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers 5----- Save Click Save to take effect 6----- Test Click Test to see if Mail has been successfully configured. Click Test to see if Mail has been successfully configured. Test result .
FTP server: If your FTP server is located on the LAN, you can set as Figure as above. If you have an FTP server which you can access on the internet, you can set as below. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV. Username / password: The FTP account and password. Click Save to take effect. Click Test to see if FTP has been successfully configured.
4.4.7 P2P (Except FI9804W / FI9805W / FI9805E) Access the camera by smart phone (Android or iOS operating system),please refer to the Quick Setup Guide. First of all, you need to open the P2P function of the camera at Settings > Network > P2P. 4.5 Video This section allows you to configure Video stream settings, On screen display and Snapshot settings. 4.5.1 Video Settings There are two ways to set the stream video settings. They are main stream video settings and sub stream video settings.
Stream Type: There are four types to identify different streams you have set. If select the HD Mode, the clearer video will become, and it will take up more bandwidth; If select the Smooth Mode, the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. The Equilibrium Model is a value between HD Mode and Smooth Mode. Resolution: The camera supports multiple types, For example: 1080P, 960P, 720P, VGA. The higher the resolution is, the clearer video will become.
This page is used to add privacy zone on the video. Allow On Screen Display Mask There are two options: Yes or NO. Select yes and draw a mask area on the video, the mask area will be black on the video. The privacy zone Click OK button and return to the Privacy Zone page, click Save to take effect.
4.5.4 Snapshot Settings In this page you can set the snapshot pictures' image quality and the storage path. Manual snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer. Pictures Save To: FTP or SD card. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP or SD card automatically. If you select the FTP, you can set the file name which the picture save to.
Enable timing to capture To enable capture interval, follow the steps below: 1 Select Enable timing to capture 2 Capture interval: The interval time between two captures. 3 Select the capture time Capture anytime Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture. Specify an capture schedule Click the week day words, the corresponding column will be selected.
To enable motion detection, follow the steps below: 1 Enable Motion detection 2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. 3 Trigger interval--- The interval time between two motion detections. Here supports 5s / 6s / 7s / 8s / 9s / 10s / 11s / 12s / 13s / 14s / 15s. Select one interval time.
If you select this checkbox, when the motion has been detected, the camera will push the message to the phone which has been connected the camera. 5 Set detect area Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings. When something moving in the detection area, the camera will alarm. 6 Alarm Schedule A Alarm anytime when motion is detected Click the black button up the MON, you will see all time range turn red.
C Press the left mouse and drag it on the time boxes, you can select the serial area, 7 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. 4.6.2 Sound Detection FI9800P do not support Sound alarm.
If the Sensitivity is set to High, the camera will detect the sound whose more than 55db. If the Sensitivity is set to Medium, the camera will detect the sound whose more than 65db. If the Sensitivity is set to Low, the camera will detect the sound whose more than 75db. If the Sensitivity is set to Lower, the camera will detect the sound whose more than 85db. If the Sensitivity is set to Lowest, the camera will detect the sound whose more than 95db. 4.6.
There is an IO alarm input / output lines in the FOSCAM camera tails. Enable IO alarm need this cable to connect to the alarm device (door sensor, infrared sensor, smoke detector, etc.).
Setting IO alarm On the IO page, Enable the I/O alarm, select the Send E-mail and Snapshot before you have configured the mail and FTP. If an IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning sound, alarm lights in flash etc). Click Clear IO alarm output , the alarm output device will stop alarming. If IO alarm is triggered again after alarm interval, IO alarm output device will be restart. NOTE: Motion detection alarm can also be triggered IO alarm output.
4.7.2 Alarm Record 4.7.3 Local Alarm Location On this page you can enable local alarm record, and select the local alarm record time. 4.7.4 Schedule Recording When the video is selected as FTP, the device supports scheduled recording.
When the video is selected as SD card, the device supports pumping frame recording (FI9803EP, FI9900P, FI9905B, FI9900EP, G2 support SD card).
Record frame: There are six frame selections, such as 1 / 30, 4 / 30, 8 / 30, 15 / 30, 24 / 30, 30 / 30. Recommended default is 4 / 30. The greater the Frame rate is, the sharper picture quality is, and the greater of storage space is, the shorter the storage time is. Record full strategy: When the SD card is full, you can choose to cover the previous recording, or stop recording. Audio Record: You can choose Yes or No. NOTES: Scheduled recording only supports video saved to the SD card or FTP server.
4.8 PTZ (only FI9805E) This page will allow you to change the pan / tilt speed and do RS485 settings (Only FI9805E have this feature). 4.8.1 Pan / Tilt Speed There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired pan / tilt speed type and click save button . 4.8.2 RS485 Configuration (Only for FI9805E) This camera supports the standard 485 cradle head protocol (PELCO-D and PELCO-P).
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera. Click Save to take effect. 4.
4.10.2 System Upgrade Click Download the Latest Firmware, you will see the following screen. And click Save to save the firmware on your computer locally. Your current firmware version will be displayed on your screen. You may go to the Status > Device Information page to check for the latest firmware versions available. Click Browse, choose the correct bin file and then click System upgrade. Don't shut down the power during upgrading. After upgrading, you can see the upgrade result.
CAUTION: We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. NOTE: 1) Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 2) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file.
power during it installing. After installing is complete, you will receive a system prompt. 4.10.4 Factory Reset Click Factory Reset button and all parameters will return to factory settings if selected. The default administrator username is admin with a blank password. 4.10.5 Reboot Click Reboot to reboot the camera. This is similar to unplugging the power to the camera.
5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP) On this page you can view the record files stored in the SD card. Section 1 Define the Record files time and Type : The storage path of record files : Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually. : The type of records files, Here supports two typs: Normal record, Alarm record and All records.
Section 2 Search record files Section 3 Play / Stop / Audio / Full screen Buttons On this panel you can see all record files satisfy the conditions you set. Please select one record file before use these buttons. Click this button to play the record files Click this button to stop the record files Open or stop audio Click this button to make full screen, and double click left mouse to exit full screen.
6 Appendix 6.1 Frequently Asked Questions NOTE: Any questions you would meet, please check Network connections firstly. Check the working status revealed by the indicators on the network server, hub, and exchange. If abnormal, check the network connections. 6.1.1 Equipment search tool cannot find the camera After power on camera and connect it to router by Ethernet cable, open Equipment Search Tool it cannot find any camera IP address. Shows a blank window like below.
6.1.2 Install plugin for Internet Explore Suggest use IE browser to log in the camera and install the plugin for the first time, then you can use it on other browser as well. Just remember to allow the plugin to run. See below for steps to install plugin via IE browser. Step 1: User IE browser to log in the camera for the first time, it will prompt to ask your install the plugin on the bottom of IE browser. Step 2: Click Install to continue the installation of the .exe plugin.
Step 4: Click Finish and reboot IE browser to log in the camera. Note, for Safari on MAC OSX it’ll show a link “Plugins are not found, click me to download” just above login windows of the camera. Please click it to download plugin and follow wizard to install. See this link for help if after installed plugin but still cannot login camera: http://www.foscam.com/faqs/view.html?id=14 6.1.
Step1: Please make sure wireless signal is strong enough to connect with. (1) Make sure the camera antenna is fixed well; (2) Best to keep the distance between the camera and router in 2~3 meters while setup; (3) There’s no interference or obstacles from house appliance or walls; Step2: Please check if the frequency band of the wireless signal is 2.4GHz. Our cameras only support connecting to 2.4GHz frequency wireless band. If your wireless router is dual band, that supports two frequency band 2.
(2) (3) (4) (5) Choose Recording for the alarm action. Set the Detection Area Set a Schedule. Click Save to save the settings. Note: 1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red. 2) Please make sure your camera time is correct. 3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids. Or for some models you can setup 3 detection zones in total.
6.1.6 How to setup alarm Emails Setup alarm Emails, when camera detects a motion it’ll send Email with snapshot to inform about the motion alarm. Steps as below. Step 1: Setup Mail Settings Before you set, please make sure that your email for sender enabled SMTP. And get your Email SMTP server, SMTP port, TLS information ready. Please go to Settings > Network > Mail Settings menu to setup your email firstly.
1. 2. 3. 4. Click enable, Choose Send E-mail for the alarm action, set your detection area, Set your schedule. Do not forget to click on Save after you finish settings. If there is motion trigger, camera will alarm and you can receive alarm emails. Note: (1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red. (2) Please make sure your camera time is correct. (3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids.
port forwarding. When it unable to connect remotely, below tips can help app establish the connection: (1) Update app and camera’s firmware to latest version, (2) Power off the camera then power back on, (3) Delete camera from app then re-add it back, also lower camera’s resolution. 6.1.9 Camera is added by others When use myfoscam.com cloud or Foscam app, one camera can only be added to one account at the same time.
Infrared mode Automatic or manual IR range With 1 Infrared Lamp Array, IR LEDs for IR range up to 20m / 66ft Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE 802.
Diagonal :75º Video Network System Requirements Other Features Power Physical Environment Certification Image Compression H.
Lens Video Network System Requirements Other Features Power Physical Environment Certification Aperture F1.2 Angle of View Horizontal:70º Diagonal: 75º Image Compression H.
Lens Video Audio Network System Requirements Other Features Power Physical Environment Display Resolution 1280 * 720 (1.0 Megapixels) Min. Illumination 0 Lux (with IR Illuminator) Lens Type Glass Lens focal length f:2.8mm Aperture F1.2 Angle of View 70º Image Compression H.
Temperature Certification Operating Humidity 10% ~ 80% non-condensing Storage Temperature -20ºC ~ 60ºC (-4ºF ~ 140ºF) Storage Humidity 0% ~ 90% non-condensing CE, FCC, RoHS Specification Image Sensor Lens Video Network Alarm Hardware Interface Environment PC Requirements FI9805W Image Sensor High Definition Color CMOS Sensor Display Resolution 1280 * 960 (1.3 Megapixels) Mini. Illumination 0 Lux (with IR Illuminator) focal length f 4mm Aperture F1.
Supported OS Microsoft Windows 2000/XP, Vista 7; Mac OS iOS, Android Browser IE8 and above version or compatible browser, Firefox, Chrome, Safari or other standard browsers Software Upgrade Upgrade from network Certification IC, CE, FCC, RoHS Specification Image Sensor Lens Audio Video Network Alarm Hardware Interface PoE FI9805E Image Sensor High Definition Color CMOS Sensor Lens f : 4mm Mini.
Input Voltage DC 36V ~ DC 57V Output Voltage DC 12V / 2.0A Output Power 7.5 Watts (Max.) Wiring Standards 100M BASE-T Operate Temper -20ºC ~ 60ºC (-4ºF ~ 140ºF) Operate Humidity 20% ~ 85% non-condensing Storage Temper -20ºC ~ 60ºC (-4ºF ~ 140ºF) Storage Humidity 0% ~ 90% non-condensing Dimension (L * W * H) 180mm * 98mm * 103mm / 7.1in * 3.9in * 4.1in CPU 2.0GHZ or above (suggested 3.0GHz) Memory Size 256MB or above (suggested 1.
Audio Compression PCM / G.726 Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b / g / n IEEE802.11b: 11Mbps (Max.); Data Rate IEEE802.11g: 54Mbps (Max.); IEEE802.11n: 150Mbps (Max.).
Aperture Angle of view Image Frame Rate 30fps (60Hz), 25fps (50Hz), downward adjustable Image adjustment 480), QVGA (320 * 240) dual stream The hue, brightness, contrast, saturation, sharpness are adjustable flip and mirror Infrared mode Automatic or manual With 30pcs IR-LED, IR LEDs for IR range up to 20m / 66ft Input / Output External RCA interface for two-way audio Audio Compression PCM / G.
Certification FCC, IC, CE, RoHS, IP66 ITEMS Image Sensor Lens Video Audio FI9800P Sensor High Definition Color CMOS Sensor Display Resolution 1080 * 720 (1.0M Pixels) Min. Illumination 0 Lux (With IR Illuminator) Lens Type Glass Lens focal length f:2.8mm Aperture F1.2 Angle of View Horizontal: 70º Diagonal: 75º Image Compression H.
Power Physical Environment Reset Reset button is available Power Supply DC 12V / 1.0A Power Consumption 4.2 Watts (Max.) Dimension (L * W * H) 97mm * 67mm * 64mm / 3.8in * 2.6in * 2.5in Net Weight 350g / 0.
s Microsoft IE8 and above version or compatible browser; Browser Mozilla Firefox; Google Chrome; Apple Safari. Other Features Power Physical Motion Detection Alarm via E-mail, upload alarm snapshot to FTP Privacy Block Set privacy area manually User Accounts Three levels user role Firewall Supports IP Filtering Reset Reset button is available Power Supply DC 12V / 1.0A POE Standard 802.3af Power Consumption 5 Watts (Max.) Dimension (L * W * H) 98mm * 65mm * 62mm / 3.9in * 2.6in * 2.
his own expense. FCC Caution Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm (7.9in) between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA) number before returning the product. If the product you received is suspected to be defective and the product warranty has not expired, The RMA number will allow your reseller to track your return much easier and help them expedite processing your request.
During replacement limit, if customers ask for replacement due to the product does not fit for customer's personal expectation, customers should responsible for both shipping fee. Customers shall be responsible for both shipping fee if their product beyond the replacement limit but still in warranty limit. Repair Service Out Of Warranty FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee.
Foscam company does not need to take any responsibility of the special, incidental or corresponding loss by the products of our company or any software provide by our company, including but not limited to operating loss, profit or purpose. The company only takes the responsibility applicable to national and local legal requirements.
CE Certificate statement Website: https://www.foscam.com/company/ce-certificate.html https://www.foscam.com/Images/ce/DeclarationofConformitydownload(Germany).pdf Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd.
