Instructions
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Equipment search tool cannot find the camera
- 6.1.2 Install plugin for Internet Explore
- 6.1.3 Unable to connect to router wirelessly
- 6.1.4 Forgot camera’s user name and password
- 6.1.5 How to setup alarm recording to SD card (FI9
- 6.1.6 How to setup alarm Emails
- 6.1.7 Camera is not displaying image
- 6.1.8 Unable to connect camera remotely using Fosc
- 6.1.9 Camera is added by others
- 6.2 Default Parameters
- 6.3 Specification
- 6.4 CE & FCC
- 6.5 WARRANTY
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
10
2 Access the IP Camera
2.1 Hardware Connection & Software Installation
1. Mount the antenna and make it stand vertically (Only for the device with external antenna).
2. Connect the camera to the LAN network (Router or Switch) via network cable.
3. Connect the power adapter to the camera.
4. Visit Foscam official website http://www.foscam.com , select “Support > Download Center > Software Tools”, then
you can find the “Equipment Search Tool”, download the tool to your computer, the icon shows as below:
NOTES:
If your computer (Windows OS) supports autorun function, you can find the corresponding file in the
opened control panel.
2.2 Access the Camera In LAN
2.2.1 Wired Connection
The camera supports HTTP and HTTPS protocols, you can access the camera in two ways.
(1) Http:// LAN IP + Http Port No.
The default HTTP port NO. is 88. Double click the Search Tool icon to run, and it should find the camera's IP
address automatically after you plug in the network cable.