Instructions
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Equipment search tool cannot find the camera
- 6.1.2 Install plugin for Internet Explore
- 6.1.3 Unable to connect to router wirelessly
- 6.1.4 Forgot camera’s user name and password
- 6.1.5 How to setup alarm recording to SD card (FI9
- 6.1.6 How to setup alarm Emails
- 6.1.7 Camera is not displaying image
- 6.1.8 Unable to connect camera remotely using Fosc
- 6.1.9 Camera is added by others
- 6.2 Default Parameters
- 6.3 Specification
- 6.4 CE & FCC
- 6.5 WARRANTY
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
26
4 Advanced Camera Settings
Click the button Settings, goes to Administrator Control Panel to make advanced camera settings.
4.1 Setup Wizard
The way to set it, you could refer to section 3.1.
4.2 Device Status
Device Status contains four columns: Device Information, Device Status, Session Status and Log, it will show
you various information about your camera.
4.2.1 Device Information
Camera Model: The model of the device.
Camera Name: The Device Name is a unique name that you can give to your device to help you identify it.
Click Basic Settings and go to Device Name panel where you can change your camera name. The default
device name is anonymous.
Camera ID: Display the MAC address of your camera. For example Device ID is 008414350787, the same
MAC ID sticker is found at the bottom of the camera.
Camera Time: The system time of the device. Click Basic Settings and go to Camera Time panel and adjust