Instructions
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Equipment search tool cannot find the camera
- 6.1.2 Install plugin for Internet Explore
- 6.1.3 Unable to connect to router wirelessly
- 6.1.4 Forgot camera’s user name and password
- 6.1.5 How to setup alarm recording to SD card (FI9
- 6.1.6 How to setup alarm Emails
- 6.1.7 Camera is not displaying image
- 6.1.8 Unable to connect camera remotely using Fosc
- 6.1.9 Camera is added by others
- 6.2 Default Parameters
- 6.3 Specification
- 6.4 CE & FCC
- 6.5 WARRANTY
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
50
If the Sensitivity is set to High, the camera will detect the sound whose more than 55db.
If the Sensitivity is set to Medium, the camera will detect the sound whose more than 65db.
If the Sensitivity is set to Low, the camera will detect the sound whose more than 75db.
If the Sensitivity is set to Lower, the camera will detect the sound whose more than 85db.
If the Sensitivity is set to Lowest, the camera will detect the sound whose more than 95db.
4.6.3 IO Alarm (only FI9805E)
This IP camera provides a IO alarm terminal block which is used to connect to external input / output device.
The alarm device (door sensor, infrared sensor, smoke detectors, etc) send input command to the network
camera, then the network camera send output command to the alarm output device (local audible alarm, lights
alarm,etc).