Instructions
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Equipment search tool cannot find the camera
- 6.1.2 Install plugin for Internet Explore
- 6.1.3 Unable to connect to router wirelessly
- 6.1.4 Forgot camera’s user name and password
- 6.1.5 How to setup alarm recording to SD card (FI9
- 6.1.6 How to setup alarm Emails
- 6.1.7 Camera is not displaying image
- 6.1.8 Unable to connect camera remotely using Fosc
- 6.1.9 Camera is added by others
- 6.2 Default Parameters
- 6.3 Specification
- 6.4 CE & FCC
- 6.5 WARRANTY
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
52
Setting IO alarm
On the IO page, Enable the I/O alarm, select the Send E-mail and Snapshot before you have configured the
mail and FTP.
If an IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning
sound, alarm lights in flash etc). Click Clear IO alarm output , the alarm output device will stop alarming. If IO
alarm is triggered again after alarm interval, IO alarm output device will be restart.
NOTE: Motion detection alarm can also be triggered IO alarm output.
4.7 Record
4.7.1 Storage Location
Recording Location: SD card, FTP.
SD card (Only FI9803EP / FI9900P / FI9905B / G2 / FI9900EP / FI9901EP): The video will be saved in SD
card. Make sure the camera has been inserted the SD card. On this page, you can see the available
space of the SD card.
FTP: The video will be saved in FTP. Please refer to 4.4.8 FTP Settings.
Local Recording Location: For Windows OS, the manual recording path is C:/ IPCamRecord, you can
change another one. For MAC OS, the manual recording path is: / IPCamRecord.
Enter the local folder: Click here,you can enter the local folder.