Instructions
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Equipment search tool cannot find the camera
- 6.1.2 Install plugin for Internet Explore
- 6.1.3 Unable to connect to router wirelessly
- 6.1.4 Forgot camera’s user name and password
- 6.1.5 How to setup alarm recording to SD card (FI9
- 6.1.6 How to setup alarm Emails
- 6.1.7 Camera is not displaying image
- 6.1.8 Unable to connect camera remotely using Fosc
- 6.1.9 Camera is added by others
- 6.2 Default Parameters
- 6.3 Specification
- 6.4 CE & FCC
- 6.5 WARRANTY
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
56
4.8 PTZ (only FI9805E)
This page will allow you to change the pan / tilt speed and do RS485 settings (Only FI9805E have this feature).
4.8.1 Pan / Tilt Speed
There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired pan / tilt speed
type and click save button .
4.8.2 RS485 Configuration (Only for FI9805E)
This camera supports the standard 485 cradle head protocol (PELCO-D and PELCO-P). Please configure the
RS485 protocol corresponding information first, or else the cradle head may cannot work.
4.9 Firewall
This section explains how to control the access permission by checking the client PC's IP addresses. It is
composed of the following columns: Block access from these IP addresses and Only allow access from
these IP addresses.