Instructions
Table Of Contents
- Security Warning
- 1 Overview
- 2 Access the IP Camera
- 3 Surveillance Software GUI
- 4 Advanced Camera Settings
- 5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP
- 6 Appendix
- 6.1 Frequently Asked Questions
- 6.1.1 Equipment search tool cannot find the camera
- 6.1.2 Install plugin for Internet Explore
- 6.1.3 Unable to connect to router wirelessly
- 6.1.4 Forgot camera’s user name and password
- 6.1.5 How to setup alarm recording to SD card (FI9
- 6.1.6 How to setup alarm Emails
- 6.1.7 Camera is not displaying image
- 6.1.8 Unable to connect camera remotely using Fosc
- 6.1.9 Camera is added by others
- 6.2 Default Parameters
- 6.3 Specification
- 6.4 CE & FCC
- 6.5 WARRANTY
- 6.6 Statement
- 6.1 Frequently Asked Questions
- 7 Obtaining Technical Support
64
6.1.2 Install plugin for Internet Explore
Suggest use IE browser to log in the camera and install the plugin for the first time, then you can use it on other
browser as well. Just remember to allow the plugin to run. See below for steps to install plugin via IE browser.
Step 1: User IE browser to log in the camera for the first time, it will prompt to ask your install the plugin on the
bottom of IE browser.
Step 2: Click Install to continue the installation of the .exe plugin.
Step 3: Follow the Setup Wizard to finished installing the plugin
Note: When starting to install the plug-in, it will force to close the IE browser. Please click Yes to close the IE
browser firstly.
And click Next to follow the setup wizard.