User Manual QHD Wireless IP Camera Model: X4 V1.
Table of Contents Security Warning................................................................................................................................................................... 1 1 Overview............................................................................................................................................................................. 2 1.1 Key Features..............................................................................................................
Security Warning Please change the password of your doorbell regularly, using a combination of numbers, letters and special characters. We recommend that you regularly update your doorbell to the latest available software and firmware versions to help ensure the best experience for your doorbell.
1 Overview Welcome to use our product, Foscam Camera. Foscam Camera is an integrated IP Camera with a color CMOS sensor enabling viewing in High Definition resolution.It combines a high quality digital video camera, with a powerful free Foscam Video Management Software，to bring clear video to your desktop from anywhere on your network or over the APP. It supports P2P function.
1.2 Read before Use Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended. 1.3 Package Contents ● IP Camera × 1 ● AC Adapter × 1 ● Quick Setup Guide × 1 ● Power Line × 1 ● mounting plate × 1 1.
Lens: Fixed focus lens. Magnetic Bracket: Adsorbing on a ferromagnetic object using a magnet on the base Rear panel: One-button call /Reset One-button call: Press and hold the button for 1 to 5 seconds to trigger One-button call, the status light will blink every 0.4 seconds and keep on 3 seconds; Reset: Press and hold the Reset button for more than 10 seconds to set the camera to factory default, the Power light will blink every 0.4 seconds; Speaker: Built-in speaker Power: DC 5V/1A Power supply.
1.7.1. Place Your Camera on a Flat Surface You can place your camera on a flat surface (desk, shelf, Table, etc.). 1.7.2.
1.7.3. Your Camera to the Wall Install the mounting plate on a wall or ceiling with supplied fxing screws. Note: Align points a and b to insert the camera base to the mounting plate. Rotate so that points a and b are aligned, this attaches the camera securely to the base.
3 Specification ITEMS X4 Sensor Image Sensor Display Resolution Lens Video Audio High Definition Color CMOS Sensor 4.0M Pixels Min. Illumination N/A (Without IR Illuminator) Lens Type Glass Lens focal length f 2.8mm Aperture F 2.6 Angle of view Horizontal:97.2° Diagonal : 116.6°, Vertical:52.6° Image Compression H.265/H.
Power Physical Privacy Block N/A User Accounts Three levels user role Firewall Supports IP Filtering One-button call Press the button to call the mobile phone Reset Reset button is available Power Supply Micro USB 5V/1.0A Power Consumption 5 Watts (Max.
