Operating Instructions

Remote Control Operating Instructions:
Within 10 min. of plugging fan to power source, press and hold button for 5 sec. to pair remote
control and fan. Successful pairing will trigger beep alert .
Turns the fan off.
Switch between summer mode and winter mode.
·Summer mode - (Counter-clockwise) A downward
airow creates a cooling effect.
·Winter model - (Clockwise)
An upward airow moves warm air off the ceiling area
and redistributes the warm air that hovers around the
ceiling to the living space.
Turns the fan on and Increases fan speed.
Turns the lights on or off and RF pairing.
Note: Press/hold button for 5 sec. within 10 min. of plugging fan to power source to pair
remote and fan. Successful pairing will trigger beep alert .
Remote Control button denitions
Turns the fan on and decreases fan speed.
ON/OFF
warm
Switch the fan speed between nature mode and normal
mode. Simulate a natural breeze to make you comfortable
when you sleep.
Note:Press/hold this button for 5 sec. to turn off the beep.
Press/hold button for 5 sec. again to turn it on.
Turns the warm light on. WIFI Troubleshootings.
Note: Press/hold button for 5 sec. till beep alert. The fan will switch to AP Mode, then select
AP Mode on APP, follow the APP control instructions will enable fan Wi-Fi.
Press/Hold button to decrease the desired light level.
Press/Hold to button to increase the desired light level.
Warning: Do not expose the remote control to rain or water.
Pairing the Remote Control to Your Fan
2.4G Remote Control QZ-01-2.4G