Operation Manual
4)
Time setting
5)
Room number modification
Enter administrator
settings
(step
one)
Voice broadcast: press "1" for administrator settings,
press
"2"
for
user
settings.
Press "3" voice broadcast: please press "1" for voice setting, "2" for unlock mode, "3" for language
selection, 4 for time setting, and 5 for room number modification.
Press "5" voice broadcast: room number "8888", please input correct room number ( 4 numbers )
and press # to confirm.
1)
Search
“Tuya
Smart”
in
App
Store
or
an
App
market,
download
and
install
it.
2)
Register
using
your
cellphone
number
and
log
in.
3)
Click
“Security
&Sensor”,
find
“Lock(Bluetooth)”,
click
and
add
a
device
following
instructions
before
use.
4)
Remote unlocking: wake up the screen and press “9”+”#”. There will be a voice prompt: requesting remote
unlocking.
Add a network
1)
Press“*”+“#”to authenticate administrator identity and then press “1” to access administrator settings. Then
there will be a voice prompt of pressing “3” for network configuration.
2)
Voice prompt in network configuration mode: press “1” for hotspot connection and “2” for intelligent
connection.
a)
Hotspot connection mode b) Intelligent connection mode
3)
When the network is successfully added, the 1st, 2nd, 3rd and 4th lights on the keyboard will be on in order
with a voice prompt of “operation completed”.
4)
In the event of network addition failure, the 1st, 2nd, 3rd and 4th lights on the keyboard will not be on and
there will be a voice prompt of “operation failed” upon timeout.
3
1)
Input the wrong password more than 5 times in a row, the keyboard lock for 30 seconds, it does not respond
to any operating system in 30 seconds.
2)
Password peeping prevention function: input password as follows when opening the door with password: XXX
password XXX; you can add some extraneous codes before and after the password, and then press "#" to
confirm. The password must be included in the input contents.
3)
If there is no operation more than 10 seconds , system will automatically exit.
4)
After the voltage is lower than 4.8v, the lock will automatically alarm every time when it is opened. After the
alarm, the lock can be opened for 200 times. After the number of times exceeds, each unlock delay is 5 seconds,
new batteries must be replaced before the number of times available.
5)
When normal open mode is off, press "5#" successively, and the voice says "please enter unlock information".
After entering the unlock information, the voice says "normal open mode, please pay attention to locking".
6)
When normal open mode is on, press "5# successively, and the voice says "normal open mode closed".
7)
Back locking function: After pressing back locking key, the voice says "the door is locked". Now, ordinary users
cannot open it, and only administrators can do so.
Product Name
Smart lock
Model No
R9
Quiescent current
≤ 50uA
Dynamic current
≤ 180mA
Administrators’ number
9
Fingerprint number
110
Fingerprint + password
300
Fingerprint scanner
Semiconductor
Fingerprint contrast time
≤ 0.6Second
Fingerprint identification Angle
360°
False Rejection Rate
≤ 0.1%
False Recognition Rate
≤ 0.0001%
Reaction timer
≤ 0.1 Second
Power type
6V
Emergency powering
5VDC
Working temperature
-25~60℃
Working Relative Humidity
20%~90%RH
Human voice
Yes
KBD
Touch standard 12-bit keyboard
Password Length
6-8bit
Phantom password
16bit
Low voltage alarm
4.8±0.2V
Unlock time
≤ 1Second
4
9. Other notes
Press "3" voice broadcast: please press "1" for voice setting, "2" for unlock mode, "3" for language
selection, 4 for time setting, and 5 for room number modification.
Enter administrator
settings
(step
one)
Press "4" voice broadcast: it is 11:53,March 4th,2019 now. Please modify based on the
format
( year-month-day, for example:1903041153 ), and then press "#" to confirmed, it would tell you
that operated sucessfully.
7. Restore factory settings
Initialization
state
8. APP Configuration (Tuya Smart) ; optional
10. Technical Parameters
Press "4" voice broadcast: please input administrator information (123456),
press # to
confirm.
Successful
initialization
Voice broadcast: press "1" for administrator settings,
press
"2"
for
user
settings.
Voice broadcast: press "1" for administrator settings,
press
"2"
for
user
settings.
Press "3" voice broadcast: press "1" for Chinese, press "2" for English. you can choose one choice and
then it would tell you that operated sucessfully.