User's Manual

MD1
6.Re-pairing: To touch the PAIR button on the control panel for re-pairing,
meanwhile the indicator will flash, and there is voice prompt” Waiting for
the pairing”. then you can pair the MD1 with your Mobile, the voice prompt
【pairing completed】after paired.
8.AUX input play: connect MD1 and Audio source with 3.5mm Audio Cable
then touch the INPUT button on the control panel, the indicator will turn
red and the unit will be connected to the AUX channel play. You can play
music via 3.5mm from Mobile, Mp3, and PC.
INPUT
MADE IN CHINA
Address : hongtu RD,Songxia lndustry Park,Songgang Nanhai District,Foshan,
Guangdong Province,China
Manufacturer:Foshan LANCHIYA Digital Technology Co., Ltd China
SPECIFICATIONS
A m pl if ie r o ut pu t po w er : le f t/ ri gh t 1 .5 W X 2 / 3Ω
S u bw oo fe r 5 WX 1 /2 Ω
A m pl if ie r i np ut s e ns it iv i ty : ≤50 0 mV
: ≤ %
A m pl if ie r S NR : ≥ 75 d B
F r eq ue nc y r es po ns e :6 5H z ~2 0K Hz
D C i np ut : DC 9 V 2. 5A
B a tt er y: 7 . 4V 2 00 0 mA h
B a tt er y ti m e 6- 10 h ou rs
B a tt er y ch a rg in g ti m e: 4 -6 h ou rs
B l ue t oo th r a ng e: 8 - 10 M
B l ue to ot h v er si on : 2 .1 +E D R Su pp o rt A 2D P
D i st or ti o n 1
5
6
9.Built-in battery use: when using the built-in battery to play music, the unit
will manage the battery use automatically, when the power is low, the unit
will decrease the volume to ensure the sound quality and longer play time,
and voice prompt(NO battery please recharge) once in 1 minutes, the front
indicator will be red and flash, When battery cannot support normal used
unit will be power off after red indicator flash for 5 times.
6.Please use power adaptor which provide from Lanchiya to avoid damage
your speaker.
7.Not work with NFC: please make sure the mobile has NFC function and turn
it on.
8.The phone case may in fl ue nc e the NFC function, please remove if you
cannot connect NFC as well.
9.Please recharge or user power adaptor when battery is low, for the device
can work as well.
10.Please recharge the batter in every three months if long times no use.
11.The speaker has high capacity batter inside please avoid the heat, wet,
do not disassemble the battery or put in into water or fire.
12.If you have problem with NFC, please check:
1)Make sure the mobile has NFC function,
2)Make sure the NFC and Bluetooth is ON
3)Make sure the NFC can activate the Bluetooth and audio in you mobile
4)Make sure the mobile is unlocked
5)Remove the phone case
6)Use the right part of NFC on your mobile
7)If the NFC found AMETHYST MD1 but can't connect, make sure MD1 is
on and under Bluetooth mode
NOTE
*
1.The Bluetooth device can't find the speaker, the speaker may still connect
with last Blue tooth device or another device are searching and connecting
with speaker at same time. Now you need to operate as Step 6 to re-connect it
2. If you hear intermittent sound or no sound from speaker after connection
Please check if the distance from you and speakers are in communication
range (8-10M without barrier)
3.if you can not connect with speaker as well, please power it off for 3s then
turn it on.
4.Don't let Opposite close to speaker when you use speaker phone function
to avoid Echo
5.Please use default music player with your blue tooth device system like,
iPod, Samsung player, Windows media player. As lots of third party music
player does not support smooth song change function, to avoid “pu”sound.
7.TF card: Insert the TF card when MD1 is on, the Md1 will play music from
TF card automatically, or you can press INPUT to select TF card, the front
indicator will be orange, follow the step 4 to control the music playing.
PAIR
INPUT
10.Charging: the unit is with built-in battery, please use the supplied power
adapter to charge it, the green indicator on the back of the unit will flash
when charging. When the battery is fully-charged, the green indicator
will stop flash
MD1插卡版英文说明书MD1-G01-0
Switching Power Supply
Model:GT-WAAU09000250-102
INPUT:100-240V~50/60Hz 0.8A
OUTPUT:DC 9V 2500mA
Genesis Science Technology Limited