User's Manual

Table Of Contents
SPECIFICATIONS
Amplifier output power: left/right 1.5Wx2, subwoofer 3.5Wx1
Amplifier input sensitivity: 400m V
Amplifier SNR: 70dB
Frequency response:70Hz~20KHz
Power voltage: AC100-240V, 50/60Hz
Battery: 7.4V 1800mHA
Battery time 10hours
Battery charging time: 4-6hours
Blue tooth range: 7-10M(23-33FT)
Bluetooth version: 3.0 2.4G Support A2DP
M1
5
6
9. Built-in battery : when using the built-in battery to play music, the unit will
manage the battery use automatically, when the power is low, the unit will
decrease the volume to ensure the sound quality and longer play time; when
the power is not enough to support normal play, the indicator will flash and
the unit will be switch to standby, please use the prope r power adapter to
charge the unit for normal use.
10.Charging:, please use the supplied power adapter to charging, the green
indicator on the back of the unit will be flashing during charging. When
the battery is fully-charged, the green indicator will stop flashing.
AMETHYSTM 1
6.Re-pairing: To touc h the PAIR button on the control panel for re-pairing,
meanwhile the indicator will flash, and there is voice prompt that the unit
is ready to be paired. Please follow step 3 to do pairing.
7.AUX input play: Switch the M1 on, touch the INPUT button on the control
panel, the indi cator will flash once, and the unit will be connected to the
AUX channel play. The music in mobiles, MP3, PC, etc can be played through
3.5mm a udio cable. Press input again will turn to bluetooth channel and
reconnect automatic.
PAIR
INPUT
8.DC5V Charging output: the unit provide standard USB port charging, with
DC5V 1A charging current, which can charge mobiles, MP3, etc through
USB cable.
FLASH
1.The Bluetooth device can't find the speaker, the speaker may still connect
with last Blue tooth device or another device are searching and connecting
with speaker at same time. Now you need to operate as Step 3 to re-connect it.
2. If you hear intermittent sound or no sound from speaker after connection.
Please check if the distance from you and speaker are over 10M(33FT)
3.To avoid echo when using the speaker phone function, do not place your
phone near or in front of the M1 speaker.
4.For best results it is recommended that Bluetooth enabled music player that
supports Apple iPod, iPhone, Samsung players, and Window media players
be used. Other, third party supported media players may not support smooth
song change functions, which may cause sound distortion or interruption
between song tracks.
5.Please use power adaptor which provide from Lanchiya to avoid damage
your speaker.
6.Please connect and disconnect adaptor when the switch is in OFF position
7.if your mobile doesn't support mobile ring transfer, you can only hear the
M1 Built in ring voice “ incoming call, when calling come in.
NOTE
*
AMETHYST INNOVATIONS CORPORATION
14731-J Franklin Avenue Tustin, CA. 92780
Phone: 714-731-2921
Website: www.amethystinnovationscorp.com
5. Speaker Phone operation: When the call comes in during playing music,
answer the call by touching the button PHONEon the touching panel and
talk facing the top panel; or dial the receiver button on the mobile to use mobile
to answer the call. Press and hold on PHONEfor 2 seconds to hang up the
phone during calling.
PHONE

Summary of content (2 pages)