User's Manual

Cleaning Burned on Residue:
1. Allow the cooktop to cool.
2. Spread a few drops of the ceramic cooktop cleaner on the burned residue area.
3.
4. If any residue remains,repeat the steps listed above.
5.
Cleaning heavy burned - on residue:
1. Allow the cooktop to cool.
2.
3.
4.
Metal Marks and Scratches :
.
.
11
V.Cleaning and Maintenance:
NOTE:
manufacturer for assistance.
If cracks or indentatons in the glass surface occurs,the cooktop glass
will have to be replaced.Contact the
If pots with a thin overlay of aluminum or copper boil dry,the overlay may leave a
black discoloraton on the cooktop.This should be removed immediately before
using the cooktop again or the discoloraton will be become permanent.
Be careful not to slide pots or pans across the cooktop surface It will leave behind
metal markings These marks are
.
. removable using the ceramic cooktop cleaner
along with the cleaning pad for ceramic cooktops
For additonal protecton,afer all residue has been removed,polish the entre
surface with the ceramic cooktop cleaner and a paper towel.
Afer scraping o the residue,apply a few drops of the ceramic cooktop cleaning
soluton on the entre burned residue area.Use the cleaning pad to remove any
remaining residue.
Used a single -
o the residue.
edge razor blade scraper approximately at a 45 degree angle
against the glass surface,and scrape ff
For additonal protecton,afer all residue has been removed,polish the entre
surface with the ceramic cooktop cleaner and a paper towel.
Using the included ceramic cooktop cleaning pad, rub the residue area,
applying pressure as needed.
WARNING
materials.
: Damage to the glass surface may occur if you use scrub pads or any
other type of abrasive cleaning