Multifunctional Air Purifier USER MANUAL SM‐666 Thank you for purchasing this air purifier. Please read the instructions carefully before using it to achieve a better effect. Please keep the instructions after reading them so that you can consult them at any time.
Directory Directory.............................................................................................................................................1 Product accessories............................................................................................................................1 Specification parameter......................................................................................................................1 Product function..............................................
Product function ●Air quality inspection ●LED display ●HEPA composite high‐efficiency filter screen ●UV Sterilization function ●Bluetooth music playing function About Air Purifier The air purifier adopts efficient HEPA \ HESA filter and UV sterilization technology, and adopts intelligent sensors to detect ambient air quality and temperature and humidity. This air purifier is used for indoor air purification. With it, you can breathe cleaner air and ensure environmental comfort.
Safety precautions Danger Do not allow water or any other liquid or flammable detergent to enter the product to avoid safety problems such as electric shock or fire. Do not insert hard objects into the air inlet and outlet to avoid product damage. Do not extend your fingers into the air outlet and air inlet during product operation to avoid injury. Please use this product in places where children do not have access to it.
Product operation control Function control and display: The operation and control of each function of the product is regulated by the touch function key. When the key is touched, the product sends out a " BI" sound response and displays the current setting or operation status through each corresponding icon in the display screen. The corresponding icon is described as follows: 1. Wirele charging transmission 2. Clean air outlet and air quality status color display window 3. Speaker 4. Speaker 5.
Key icon display and operation instructions After powering on BIBI for two times, press this key to turn it on / off, and the automatic operation mode . When the product is running, press this key to adjust the running wind speed and adjust it in low, medium and high speed cycles. The LED screen displays the wind speed icon at the same time, indicating the current operating wind speed status.
Product maintenance: (Please pull out power supply before maintenance) Daily cleaning focus on surface of AIR PURIFIER as well as , the place for wind inlet and outlet When cleaning, use soft dry towel to wipe dust and duty. When using wet towel, it need to be wrung out before using it to clean AIR PURIFIER. Don’t leave any water‐based stains on product.
Common problems and their solutions Problems Reason Solutions Power plug not insert properly Please check power supply is correct. Or, check plug if connect with the power properly Others Sent back to distributor or original factory for maintenance internal part loose, poor contact sent back to distributor or original factory for maintenance, don’t repair by yourself.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
