System Instructions

12. TF card socket.
13. Microphone socket.
14. Treble boost/cut knot
15. Bass boost/cut knot
16. Microphone volume knot.
17. Wireless broadcast volume knot.
18. Antenna.
19. Power switch.
20. DC+5V power input.
Note: Each state of the machine is stored as memory. The machine will be at the previous status before the power-off. You can
switch the function as you need.
Receiver introduction
1. Frequency switch
2. Zone switch
3. DC power input
Remote Control Function
FREQ - : short press to show the current
frequency channel; short press again to
switch the frequency channel downward
FREQ + : short press to show the current frequency
channel; short press again to switch the frequency
channel upward
Volume up
Next song
Previous song
Volume down
Play/pause
Switch mode: short press to pause / play;
long press to switch mode
Microphone 2 volume up
(not applicable in this model)
Microphone 1 volume up
Microphone switch: short press to switch on/off
microphones
Microphone 1 volume down
Microphone 2 volume down
(not applicable in this model)
Transmitter & Speaker connect Instructions
①
②
③