System Instructions

1. Connect transmitter & speaker on power gird by using adapter.
2. Turn on transmitter.
3. Press “Freq+” button on remote to set a frequency point.
4. Set speaker on same frequency point by setting receiver.
5. Press zone select button on transmitter to turn on the same zone on your speaker.
Transmitter Placement advice
1. The transmitter should be placed in a position as high as possible. The higher the transmitter, the longer the emission
distance. Avoid metal obstacles.
2. AUX analog audio input line:
Audio Cable (two-core shielding line: commonly known as microphone line): RVVP2*0.5, RVVP2*0.75
FAQ
1. No sound output?
If you can't turn on the host, check whether the power supply is working properly and whether the power supply is
properly plugged in. And if you can turn on the transmitter, check whether the sound is minimized or muted, then press
the appropriate button. Check the frequency point and zone setting, make sure the speaker and the transmitter is on
the same channel.
Attention
1. If the above method fails to troubleshoot, please go to a nearby agent to seek assistance or call service department.
2. Do not disassemble or repair by yourself.
For technical support, please kindly contact us at [e-mail].