User Guide

1 Please plug the power cord into the P2 amp then the wall to avoid

sparkers. (The sparker is caused by wrong use way)

2 Please plug the audio cables into the P2 amp then switch on to avoid

the humming and noise.

3 Please turn the VOL knob to the minimum before power on to avoid

instant loud noise.

4 Please refer to our instructions to install the tube tightly

5 Make sure the P2 amp is compatible with your headphones before use.

6 For more troubleshooting, please read the User Guide and contact us.

PAGE 1
Please plug the power cord into the P2 amp then the wall to avoid sparkers. (The sparker is caused by wrong use way) 2 Please plug the audio cables into the P2 amp then switch on to avoid the humming and noise. 3 Please turn the VOL knob to the minimum before power on to avoid instant loud noise. 4 Please refer to our instructions to install the tube tightly 5 Make sure the P2 amp is compatible with your headphones before use. 6 For more troubleshooting, please read the User Guide and contact us.