Specifications

ManualsBrandsFoster Electric ManualsAudio EquipmentBluetooth Headphone

Table Of Contents

Information contained in this document is PRIVILEGED and CONFIDENTIAL

[KT001 WH 01] Simple manual

● Product Overview

Channel Select

Button [CS]

Power Button [PWR]

Volume Up Button [Vol.+]

Volume Down Button [Vol.-]

USB-C port

Function LED (RGB)

Charging LED (Red)

Topic Value

Product type

Bluetooth® Headphone

For dedicated RSI unit

Chipset QCC3004

LED

RGB LED x1 (function)

Red LED x1 (charging)

Button

4 buttons

Power

Volume Up/Down

Channel Select (CS)

MIC MEMS x1 *1

USB USB type-C

● Hardware Information

Topic Value

ADK ADK QCC300x 1.0.167

Bluetooth® version Bluetooth® 5.0

Support profiles

A2DP v1.3.1 AVRCP v1.6

HFP v1.7

Support codecs SBC

Multipoint No

Pairing PIN 0000

PDL size 2 devices

BT Device Name KT001 WH 01

BT VID source USB Implementers Forum

BT Vendor ID 0x0230

BT Product ID 0x0012

● Software Information

*1. Always muted without factory test mode.

Specification Remarks

• Not supported any use case of connecting with

general smartphones.

• Pairing mode is locked when PDL is fully registered.

Summary of content (7 pages)

PAGE 1
[KT001 WH 01] Simple manual ● Product Overview Specification Remarks Channel Select Button [CS] Power Button [PWR] Volume Up Button [Vol.+] Function LED (RGB) Volume Down Button [Vol.-] Charging LED (Red) USB-C port ● Hardware Information Topic • Not supported any use case of connecting with general smartphones. • Pairing mode is locked when PDL is fully registered.
PAGE 2
● Button Duration ● UI – Button operation UI Event User Action UI Event User Action Power on Long press [PWR] Short Press Press and release within 800ms Power off VLong press [PWR] Long Press Press and hold for 1.
PAGE 3
● UI – Function LED LED Event LED State Image Not Connected G Power On Power Off G Pairing Mode Connected B Connected Ch.1 selected O Ch.2 selected O Factory Reset Maintenance mode O O … flash 8 times DUT mode BCCMD Mode Image B B B B B R B B R B R B R+B G No LED ● UI – Charging LED LED State Image Charge in progress R No LED Charge completed Charge Error R How to pair 2 devices in Normal mode 1. System enters pairing mode automatically when PDL is empty. 2.
PAGE 4
Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innova tion, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause un desired operation of the device.
PAGE 5
Oman EU Oman-TRA TRA/TA-R/XXXX/XX Dealer No：D090024 Safety instructions for rechargeable Lithium-ion battery pack This product has a built-in rechargeable lithium ion battery pack. Danger Do not use or handle the battery under the following conditions.
PAGE 6
CU declaration (Russia/Belarus/Kazachstan) · · · · Product name(Bluetooth® Headphone) and/or model name (KT001 WH 01) Manufacturer name and / or brand name (FOSTER ELECTRIC CO.,LTD.) Country of origin (China) The inquiry destination of the product (Foster Electric Co., Ltd. 1-1-109, Tsutsujigaoka, Akishima City, Tokyo, 196-8550, Japan) The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Foster Electric Company Limited is under license.
PAGE 7
Label Position (Behind Earpad) Detachable Earpad Labels on headphone side.