manual

12 F15
HOW TO INSTALL PITAGORA CORNER
HOOD
STEP 1
1a Mark a horizontal line on the wall on a level
with the lower edge of the extractor hood at le-
ast 650-700 mm from the pan support.
1b Mark a vertical line on the wall, 184 mm from
the corner..
1c Mark the centres of the two holes on the wall,
100 mm to 455 mm from the Horizontal line de-
scribed in point 1a.
1d Mark on the wall the centers of the two holes
180 mm to the left of the vertical line described
in point 1b.
Now mark the centers of the two hole 84 mm
from the corner and then 280 mm, on the wall
towards the right.
ATTENTION:
These holes must be positioned to 50 mm from
the top edge of the stack.
The top edge of the stack must be no more
than 950 mm from the line marked in point 1a.
STEP 2
2a Using an 8 mm bit, drill in the centres marked
according to the instructions in points 1c and 1d
(the holes must be at least 60 mm in depth)
2 .giF1 .giF
FISHERØ 8
mm
650-700
184
180
100
455
max 940
50
84
280
50